Author Information
Andrew Cooper has 123 Published Articles

United Kingdom,
Aberdeenshire,
Peterhead,
Weld-delux,
6 Gladstone road



Welding cast iron can be easy

Posted On : Dec-30-2010 | seen (662) times | Article Word Count : 438 |

There are certain elements and materials that are difficult to weld. Cast iron is one such item. But with little effort and application of right strategies, it can also be welded.
There are certain elements and materials that are difficult to weld. Cast iron is one such item. But with little effort and application of right strategies, it can also be welded. In most of the cases, welding on this item includes casting to repairs. In the foundry, the repair work is done. It is done where the casting operation is performed. The casting defects may be repaired after the portioned is machined. Mis-machined cast iron portion or part may require some repair welding, especially when holes are drilled or made in the wrong area. Welding technology is used for repairing broken cast iron parts. Broken cast iron parts are common. It is due to the brittle nature of the cast iron.

There is a wide variety of cast iron. Gray cast iron is one of the most popular types. There are some information regarding this variety of cast iron. It will definitely prove to be helpful for you to understand the welding challenges. Cast iron has 2%-4% carbon content. It is ten times much than the steel. Due to the high carbon content the carbon forms into flakes of graphite.

Molted iron is allowed to cool after it is poured into a mould. This is done during the preparation of casting. Castings that are free from any crack can be made when high carbon element is permitted to cool slowly. This is one of the most important information for you. It will be of great help while welding cast iron, especially during and after the completion of welding operation. You may allow the casting to be too slow or keep it cool so that the rate of cooling is not so crucial.

Most of the cast iron has a critical temperature of 1450 degrees F. this temperature condition can cause cracking. The arc will definitely heat the casting iron to temperatures above this point. So, it is very crucial on your part to check whether the casting is done for long periods at this temperature. It is one of the most important areas that you need to look at.

There are two common techniques of welding. One is welding through pre-heating procedure ad another is without pre-heating. In most of the cases, cast iron is welded through the pre-heating technique. In fact, it is the coon method used by most of the welding experts. Another method is to weld the cast iron by cooling it.

So now that you know the methods make sure that you find out what your requirements are and select the best method as per your needs.

Article Source : http://www.articleseen.com/Article_Welding cast iron can be easy_46661.aspx

Author Resource :
The author of this article is a great welder. As a professional welder the author has great knowledge on the same. His articles are handy references for any welder out there.

Keywords : Welder, Welding, Welding services, Steel fabrications, Belt conveyors, Conveyor systems, Wrought iron, Aluminium welders, Met,

Category : Business : Business

Bookmark and Share Print this Article Send to Friend