|
USB uses ,and their types
|
Posted On :
Feb-03-2012
| seen (498) times |
Article Word Count :
534
|
|
The usb flash drive basically use in the data transfer purpose flash drive also we called Electrically Erasable Programmable Read Only Memory.
|
Usb that means universal serial bus it support the various type of data transfer it data transfer rate is 12 mbps. An usb port supported the many type of devices like: keyboard, mouse and other peripheral devices, also supported theUSB also supports the plug and play function. Every type of usb drive supported the different function. We also use USB 2.0 is an external bus it is use for transferring the high data transfer it data transfer rates up to 480Mbps. USB 2.0 is an new bus system of USB 1.1. USB 2.0 is fully compatible with USB 1.1 and uses the same methods and same technique cables and connectors. The HP Company, Intel, Lucent, Microsoft, NEC and Philips jointly led the initiative to develop a higher data transfer rate than the 1.1 specification to meet the bandwidth demands of developing technologies and they also work on this project mainly usb is the main part of every system. It is the new way of transferring the data and controlling it is the bus model architecture features two-way communication and has been made as a response to devices becoming fast uses and requiring more interaction with the host. This port support is included in all current computer architecture chipsets and is therefore available in all recently built computers.
There are many companies like apple introduction of the USB-only iMac has been a major incentive for hardware manufacturers to produce USB versions of their devices. The future PC specifications specify that all legacy connectors on computers should be replaced by one or more USB connectors, providing generic plug and play capabilities. Support for USB hardware was available at a very early stage in NetBSD and was developed by Lennart Augustsson for the NetBSD project. The code has been ported to FreeBSD and we are currently maintaining a shared code base. For the implementation of the USB subsystem a number of features of USB are important.
The usb flash drive basically use in the data transfer purpose flash drive also we called Electrically Erasable Programmable Read Only Memory. It means an EEPROM this memory drive is a plug and play storage device. It can be used in place of a CD or a zip drive disk or floppy drive. It uses flash memory and is very portable and light weight device. This is also use as a removable drive by computer. Custom USB Flash drives does not require rebooting after it's attached, does not require batteries or an external power supply, and is not platform dependent. The flash drive consist of a small printed circuit board carrying the circuit elements and a USB connector, insulated electrically and protected inside a plastic, metal, or rubberized case which can be carried in a pocket or on a key chain, for example. The USB connector may be protected by a removable cap or by retracting into the body of the drive, although it is not likely to be damaged if unprotected. Most flash drives use a standard type-A USB connection allowing plugging into a port on a personal computer, but drives for other interfaces also exist. These devices we use on run time connected and disconnected.
|
|
Article Source :
http://www.articleseen.com/Article_USB uses ,and their types_143364.aspx
|
Author Resource :
Covetus LLC affordable SEO Company in Dallas & charlotte, Offering affordable SEO Plans to make your business run, hire seo experts from seo texas & seo charlotte. Visit now http://www.covetus.com/seoservices.html for more details.
|
Keywords :
seo texas, seo charlotte,
Category :
Business
:
Business
|
|
|
|