Tips to Check Whether your Wiring System is Safe and Energy Efficient

Re-Publish this Article

<h1>Tips to Check Whether your Wiring System is Safe and Energy Efficient</h1><strong> Author: <a href='http://www.articleseen.com/profile_Jeff Holland.aspx'>Jeff Holland</a></strong><br /><p>Electricity is a convenient and safe source of energy for power your home, if distributed properly with protected conductors. Because of the convenience, households have many electrical appliances. While these are helpful in the home, many home owners fail to maintain and protect the wiring system that serves them. According to the electricians in Kansas City, every home wiring system must equal or exceed the requirements of the National Electrical Code. Apart from that, every system is designed for economy of operation, installation, expandability and maintenance. Tips to Detect Poor Wiring - Circuit breakers trip often - Dim Light - TV picture shrinks when refrigerator or other equipment starts - Electric iron and toaster heat slowly Circuit breakers or fuses of greater amperage will not fix low voltage or small wiring problems, but proper circuit protection will ensure safe use of what you have. Contact an electrician if you don’t have enough circuits to serve all of the electrical equipment. Identify Circuits In every new building, the electrical contractor should recognize the size and circuit of conductors used should relate with the fuse size. The electrical contractor should have a record to the inside of the service entrance panel with circuit numbered, described and identified. Protect with the Proper Fuse When you remove all the fuse or over fuse, heavily loaded wires overheat. Insulation flakes off and hardens, with current carrying conductors becoming bare in spots. Wires may then heat up to burn wood, paint, dust, etc., causing serious fire accidents. Proper fusing protects you from such accidents. Check for Rewiring The type and number of major appliances and the process of heating in a home will define the size of service entrance conductors required. For a home with a fuel-fired heating system, the wires and service equipment must have rated amperage of 100 amperes. Whereas, remodeled homes that require electricity need service entrance equipment and service conductors that have nearly 150 to 200 amperes capacity. Also, when electric power suppliers offers a blend of heating and air conditioning electric rate, place both in a separate 100 amp level. Remember, if your wiring system is installed and designed with the proper control valves, electricity will be one of the safest sources of energy in your home. Suitable wiring comes first, proper selection second and finally the maintenance of protective equipment. Don't go for alternates when purchasing fuses. So, seek help of the Kansas City electricians and check your home for electrical faults, wiring and more to avoid unexpected accidents. </p><strong>About the Author:</strong><br />The author is an experienced <a rel="nofollow" href="https://tannelectric.com/locations/kansas-city" rel="nofollow">electrician in Kansas City</a>. In his spare time, he also writes about the electrical problems and solutions to deal with it. Read now, tannelectric.com/locations/kansas-city<p> Article Source: <a href='http://www.articleseen.com/Article_Tips-to-Check-Whether-your-Wiring-System-is-Safe-and-Energy-Efficient_320128.aspx'> http://www.articleseen.com/Article_Tips to Check Whether your Wiring System is Safe and Energy Efficient_320128.aspx</a></p>

Article Source : http://www.articleseen.com/Article_Tips to Check Whether your Wiring System is Safe and Energy Efficient_320128.aspx

Keywords : electrician in Kansas City, Kansas City electricians,

Category : Business : Business