Special Producing Method of PTFF Film

Author Information

momorubby has 143 Published Articles

United States of America,
usa,
suzhou,
hancheng 12 hao,

Special Producing Method of PTFF Film

Posted On : Oct-12-2011 | seen (360) times | Article Word Count : 420 |

Ptfe film owns vast and diversified utility ranging from outer pipeline protector, dielectric cover of digital gadgets and the anti-sticking pan layer for cooking.

Ptfe film owns vast and diversified utility ranging from outer pipeline protector, dielectric cover of digital gadgets and the anti-sticking pan layer for cooking. Different from our imagination, Ptfe film is not produced by plastic blowing or casting process. The thin film is cut from the rough cylinder.

PTFF belongs to the family of fluorinated materials. Such material is with the high-level temperature maintenance. This kind of material is non-combustible, so it can be used as dielectric material. Among all types of solid plastics, PTFE owns the lowest friction coefficient. Its sustainable anti-bending tense would obviously pass other two types of fluorinated plastics: FEP and PFA. However, PTFE also owns weakness: it may still own high-level melt viscosity under the temperature above 327 degrees Celsius. It is also with high-level gap sensitiveness. Therefore, common shape-forming methods like extrusion, injection molding and blow molding method would be hard to apply on PTFE manufacturing.

Different from polyethylene film, a type of manufacturing procedure should be applied before the white powder turns to thin and transparent Teflon film. That is to say, PTFE raw material would be pressed into designed piece under the household temperature. And then, the pre-forming pieces would be heated to the temperature above crystallization point. That is to say, burn the raw material above the melting temperature to get insoluble sintered block (or rough blank).

Commonly, the heating temperature should be around 380 degrees Celsius. Through the sintering process, the rough density of PTFE should be between 2.1 and 2.3g/ml as per the manufacturing condition and the forming crystal. If the cooling process is slow, the density would be higher. At that time, the material can be with high crystallization condition, hardness and high-type stability. The sintering under such pressure can gain higher density and hardness of PTFE rod without the creation of pores. It is the precondition to gain super-thin PTFE film.

When finishing the above pre-forming sintering, the film cutting can be executed. The film cutting device would use all operating gadgets on the signal device. The signal device is installed on the right base and turn to every direction. The machine operator can operate the machine via presses on the signal device's controlling pad to do blank loading and blank feeding. The thickness and speed of film cutting would be also chosen on the controlling pad in advance. When the film thickness and blank rolling are confirmed, the digital controller would automatically determine the feeding speed.

Re-Publish this Article

<h1>Special Producing Method of PTFF Film </h1> Author: <a href='http://www.articleseen.com/profile_momorubby.aspx'>momorubby</a> Ptfe film owns vast and diversified utility ranging from outer pipeline protector, dielectric cover of digital gadgets and the anti-sticking pan layer for cooking. Different from our imagination, Ptfe film is not produced by plastic blowing or casting process. The thin film is cut from the rough cylinder.

PTFF belongs to the family of fluorinated materials. Such material is with the high-level temperature maintenance. This kind of material is non-combustible, so it can be used as dielectric material. Among all types of solid plastics, PTFE owns the lowest friction coefficient. Its sustainable anti-bending tense would obviously pass other two types of fluorinated plastics: FEP and PFA. However, PTFE also owns weakness: it may still own high-level melt viscosity under the temperature above 327 degrees Celsius. It is also with high-level gap sensitiveness. Therefore, common shape-forming methods like extrusion, injection molding and blow molding method would be hard to apply on PTFE manufacturing.

Different from polyethylene film, a type of manufacturing procedure should be applied before the white powder turns to thin and transparent Teflon film. That is to say, PTFE raw material would be pressed into designed piece under the household temperature. And then, the pre-forming pieces would be heated to the temperature above crystallization point. That is to say, burn the raw material above the melting temperature to get insoluble sintered block (or rough blank).

Commonly, the heating temperature should be around 380 degrees Celsius. Through the sintering process, the rough density of PTFE should be between 2.1 and 2.3g/ml as per the manufacturing condition and the forming crystal. If the cooling process is slow, the density would be higher. At that time, the material can be with high crystallization condition, hardness and high-type stability. The sintering under such pressure can gain higher density and hardness of PTFE rod without the creation of pores. It is the precondition to gain super-thin PTFE film.

When finishing the above pre-forming sintering, the film cutting can be executed. The film cutting device would use all operating gadgets on the signal device. The signal device is installed on the right base and turn to every direction. The machine operator can operate the machine via presses on the signal device's controlling pad to do blank loading and blank feeding. The thickness and speed of film cutting would be also chosen on the controlling pad in advance. When the film thickness and blank rolling are confirmed, the digital controller would automatically determine the feeding speed. 
About the Author: I have written teflon film and PTFE rod many years, I know many thing of these marketing. And this is my web site about <a rel="nofollow" href="http://www.ptfesuppliers.com/ptfe-teflon-rod.html">PTFE rod</a> and <a rel="nofollow" href="http://www.ptfesuppliers.com/ptfe-teflon-film.html">teflon film</a>, you can find the other products about them.
 Article Source: <a href='http://www.articleseen.com/Article_Special-Producing-Method-of-PTFF-Film_90965.aspx'> http://www.articleseen.com/Article_Special Producing Method of PTFF Film _90965.aspx</a>

Article Source : http://www.articleseen.com/Article_Special Producing Method of PTFF Film _90965.aspx

Author Resource :
I have written teflon film and PTFE rod many years, I know many thing of these marketing. And this is my web site about PTFE rod and teflon film, you can find the other products about them.

Keywords : Ptfe film, PTFE rod, teflon film,

Category : Arts and Entertainment : Arts and Entertainment

Print this Article Send to Friend