|
|
Spa Chemicals, What they are and how you can benifit from them?
|
|
Posted On :
Aug-17-2011
| seen (227) times |
Article Word Count :
627
|
|
Now that you have your tub installed in your home or on your back patio you have one more step to go before you take that first soak and that is adding the hot tub chemicals.
|
|
Now that you have your tub installed in your home or on your back patio you have one more step to go before you take that first soak and that is adding the hot tub chemicals.
Treat The Water
You need to treat the water with a couple of different chemicals to make it safe to use on a regular basis, just like you have to treat the water in a swimming pool.
Chemicals To Purchase
With the number and variety of chemicals that are available, for beginners it is often frustrating and confusing to know what to purchase. It is really quite simple once you know that there is really only a couple of things to be concerned with and what to watch for. There are many manufacturers of the various chemicals but they are all basically the same, so it doesn't matter where you purchase them from.
You are going to have to get your water's pH and chlorine level up to a safe range and keep it there on a daily basis to make the water safe to use as well as clear and clean looking. Test it at the start with a test kit to see where you are starting from.
The first of the hot tub chemicals that you are going to start putting in is going to raise the pH. It has many names but just look for a label that says that it raises pH. You are going to raise this level in the beginning over the period of a couple of hours to an ideal level of 7.2 - 7.6 parts per million.
Chlorine Or Bromine
The second chemical that you are going to need is a chlorine stabilizer. This comes in granules or in small pucks which can be put in a floating container that is made to hold these pucks. This will stay in the tub all the time and just refilled as needed. After you have raised the pH to the ideal level you are going to raise the chlorine to an ideal level of 1.0 - 1.5 parts per million. Do this over a couple of hour period, too.
You may want to start raising the chlorine levels in the beginning by adding a 1/2 cup of household bleach to your tub to speed up the process. Just keep checking the levels and bring the numbers into the final safe and ideal range slowly.
Instead of chlorine you can use bromine if you don't like the smell of chlorine or you are allergic to it. It is your choice. There is little difference in the operation of the tub and for the health and safety from the water.
The third chemical that you are going to need is one that clears the water to keep it looking crystal clear. It will say something like "concentrated clarifier for spa waters" or something to that effect. You can get this in liquid or granule form.
Depending on where you live and the type of water that you have you may have to use a type of chemical to prevent the build up of scale, often from hard water. Your hot tub dealer will be able to tell you if your area is susceptible to scale or not.
So, even though there are many hot tub chemicals available on the market and many dealers will say that you need all of them, in most cases that is not true. As long as you keep the pH and chlorine levels in their respective safe ranges and keep the water clean and clear, you will have much happiness in your tub for many years.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_Spa Chemicals, What they are and how you can benifit from them?_74284.aspx
|
|
Author Resource :
For more information about spa chemicals, please Visit Worldoftrade.com and meet tons of wholesale pool chemicals suppliers.
|
|
Keywords :
spa chemicals, wholesale pool chemicals,
Category :
Home and Family
:
Home Improvement
|
|
|
|
|
|
