|
|
Roof installation with Roofing contractors south florida
|
|
Posted On :
Feb-06-2012
| seen (260) times |
Article Word Count :
423
|
|
Laying the roof of your home may be very easy unless you are a professional. If you want your home to be protected amply, you should take the help of experts for doing the job. There are many roofing contractors Broward who can do the job in a professional manner.
|
|
Laying the roof of your home may be very easy unless you are a professional. If you want your home to be protected amply, you should take the help of experts for doing the job. There are many roofing contractors palm beach who can do the job in a professional manner. Since it is a slightly tricky process, anything not done precisely can lead to some kind of damage. So it is always better to take the help of a roofing contractors south florida and get the job done in a professional manner. Here are some simple things to take care of.
Installing the roof
1. Have a level nailing surface: First shim the rafters or trusses to get a uniform or leveled nailing surface. Install the blocking to straighten the warped top chords of the rafters. Use a 6-10 foot piece of lumbar to check the flatness of the roof. Ensure that the supports are not more or less than 1/2 an inch from one another.
2. Ventilation applications: Install all the ventilation applications so that the air from the kitchen, bathroom and the laundry can be vented through the roof. Place at least half of the vents close to the peaks and along the ridges. Place the other half at the soffits or eaves. By placing about 50-80% of the vents close to the peaks, you will have maximum free ventilating area at the attic. When the area is less, the ventilating space in the attic would also be less. While installing the baffles at the eaves, try to leave at least 1 inch of space in between the framing and below the roof sheathing. All these will be aptly taken care of by the roofing deerfield beach .
3. Nail and space panels: After positioning the first panel, use the temporary fasteners in the corners. The fasteners should be installed on one end and be removed at the corners. Beginning from the panel edge, install the intermediate fasteners. If you notice properly, the roofing contractors south florida may leave about 1/8 inch of space between edge joints and adjacent panels. He may use an 8 or 10 panel edge clips for this. Cut the kerf out from the tight joints after the sheathing is done.
4. Felt installation: Clean the whole surface thoroughly. Level and smooth the felt before you fasten the shingles. Then install the shingles according to the guidelines given by the manufacturer. Proper installation can enable the roofing to last longer.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_Roof installation with Roofing contractors south florida_144866.aspx
|
|
Author Resource :
View more information on roofing deerfield beach, roofing contractors palm beach and roofing contractors south florida., please visit our website.
|
|
Keywords :
roofing deerfield beach, roofing contractors palm beach, roofing contractors south florida,
Category :
Home and Family
:
Home Improvement
|
|
|
|
|
|
