Pondpro2000 that can increase the age of your ponds

Author Information

webmaster epdmliner has 9 Published Articles

United States of America,
CT,
Shelton,
Shelton, CT, 4748,
Shelton, CT, 4748

Pondpro2000 that can increase the age of your ponds

Posted On : Jul-13-2010 | seen (446) times | Article Word Count : 610 |

Pond Pro 2000 is your answer. It is a 100% liquid EPDM and 100% compatible to your EPDM pond liner sold in pond supply stores. One Coat application. Waterproofs immediately upon application. PondPro 2000 may be applied at any temperature that permits it being spread onto the surface. It will waterproof immediately upon application. The solvent will evaporate at a rate governed by temperature but will not be affected by relative humidity.

Leaks are an eventuality waiting to happen in and around a pond/fish pond. Identifying fish ponds leaks and repairing them can be a thankless task, especially if there is no leak to be found, so first you need to find out the leak. Are you having difficulty finding that leak. Water levels keep dropping? With a 25 year history of success our fish pond liners.

Pond Pro 2000 is your answer. It is a 100% liquid EPDM and 100% compatable to your EPDM liner sold in pond supply stores. It works extremely well on all non-porous concrete fountains as well as EPDM fishponds liners. Reflecting pools are another good application for EPDM. These are demanding applications where the unique properties of EPDM have a distinct advantage over other products. To give you an idea of just how durable of a product PondPro 2000 take a look at a few of its

Characteristics:
• Pond pro will withstand temperatures from -62 to 350F
• One Coat application. No Primer is needed
• Easy Application- A true do-it-yourself product
• Waterproofs immediately upon application.
• It has proven itself superior to Acrylics, Urethanes and other elastomers for up to 3 times longer
Manual Application and instructions
Surface to be coated should be clean, dry and structurally sound. Fasten loose areas with adhesive (contact cement) or pop rivets. Oil or wax must be completely removed with solvent. Remove loose portions of existing coatings and brittle caulk with scraper and wire brush. Whatever still has good adhesion may remain to be recoated. Rusty or pitted metal should be wire brushed to remove loose oxide. Tightly adhering corrosion may be directly coated with PondPro 2000.
Asphalt based aluminum coatings should be removed as much as possible by wire brush or abrasive disc. Roof cements should be removed and replaced with butyl caulk where necessary. Fish Pond Repair torn rubber with adhesive Butyl Tape. A rubber patch may be applied over torn area if desired. Remove chalk from white rubber membrane by brushing with a detergent solution followed by a water rinse or working surface with a stiff brush. Smooth metal or plastic surfaces should be roughed up to improve adhesion of PondPro 2000. A deglossing solvent may work on some plastics.
By brush, roller or squeegee. A combination of methods might be most effective. For example, on a flat roof, pour a serpentine bead of material, distribute with squeegee, finish with a short nap roll to press air out of cracks and even out wet film. Product will self level when sufficient material has been applied. Working time is 4-6 hours depending on temperature. A single application of PondPro 2000 is preferable to multiple coats. Apply with brush around flashings and edges using long, slow strokes. On flat surfaces, material can be poured, spread with a squeegee and then evened out with a short nap roller. Touch-ups may be applied as desired after initial film has cured and surface is first wiped with solvent.
PondPro 2000 may be applied at any temperature that permits it being spread onto the surface. It will waterproof immediately upon application. The solvent will evaporate at a rate governed by temperature but will not be affected by relative humidity. Exposure to freezing temperatures before cure has taken place will not damage the film. The time necessary to reach cure should not be a concern as this process will occur automatically. Exposure to sunlight will accelerate the curing process. The final film properties of the cured membrane will be the same regardless of the time required to achieve cure. PondPro 2000 will provide long term protection even under extreme exposure conditions.

Re-Publish this Article

<h1>Pondpro2000 that can increase the age of your ponds</h1> Author: <a href='http://www.articleseen.com/profile_webmaster epdmliner.aspx'>webmaster epdmliner</a> Leaks are an eventuality waiting to happen in and around a pond/fish pond. Identifying fish ponds leaks and repairing them can be a thankless task, especially if there is no leak to be found, so first you need to find out the leak. Are you having difficulty finding that leak. Water levels keep dropping? With a 25 year history of success our fish pond liners.

Pond Pro 2000 is your answer. It is a 100% liquid EPDM and 100% compatable to your EPDM liner sold in pond supply stores. It works extremely well on all non-porous concrete fountains as well as EPDM fishponds liners. Reflecting pools are another good application for EPDM. These are demanding applications where the unique properties of EPDM have a distinct advantage over other products. To give you an idea of just how durable of a product PondPro 2000 take a look at a few of its

Characteristics: 
•	Pond pro will withstand temperatures from -62 to 350F
•	One Coat application. No Primer is needed
•	Easy Application- A true do-it-yourself product
•	Waterproofs immediately upon application.
•	It has proven itself superior to Acrylics, Urethanes and other elastomers for up to 3 times longer
Manual Application and instructions
Surface to be coated should be clean, dry and structurally sound. Fasten loose areas with adhesive (contact cement) or pop rivets. Oil or wax must be completely removed with solvent. Remove loose portions of existing coatings and brittle caulk with scraper and wire brush. Whatever still has good adhesion may remain to be recoated. Rusty or pitted metal should be wire brushed to remove loose oxide. Tightly adhering corrosion may be directly coated with PondPro 2000.
Asphalt based aluminum coatings should be removed as much as possible by wire brush or abrasive disc. Roof cements should be removed and replaced with butyl caulk where necessary. Fish Pond Repair torn rubber with adhesive Butyl Tape. A rubber patch may be applied over torn area if desired. Remove chalk from white rubber membrane by brushing with a detergent solution followed by a water rinse or working surface with a stiff brush. Smooth metal or plastic surfaces should be roughed up to improve adhesion of PondPro 2000. A deglossing solvent may work on some plastics.
By brush, roller or squeegee. A combination of methods might be most effective. For example, on a flat roof, pour a serpentine bead of material, distribute with squeegee, finish with a short nap roll to press air out of cracks and even out wet film. Product will self level when sufficient material has been applied. Working time is 4-6 hours depending on temperature. A single application of PondPro 2000 is preferable to multiple coats. Apply with brush around flashings and edges using long, slow strokes. On flat surfaces, material can be poured, spread with a squeegee and then evened out with a short nap roller. Touch-ups may be applied as desired after initial film has cured and surface is first wiped with solvent.
PondPro 2000 may be applied at any temperature that permits it being spread onto the surface. It will waterproof immediately upon application. The solvent will evaporate at a rate governed by temperature but will not be affected by relative humidity. Exposure to freezing temperatures before cure has taken place will not damage the film. The time necessary to reach cure should not be a concern as this process will occur automatically. Exposure to sunlight will accelerate the curing process. The final film properties of the cured membrane will be the same regardless of the time required to achieve cure. PondPro 2000 will provide long term protection even under extreme exposure conditions.
About the Author: Author wants to minimize the problem of pond leaks in this article. So he defines many tricks and methods to solve this problem. He also provides some guidelines that how we can utilize our <a rel="nofollow" href="http://www.pondpro2000.com/">pond repair</a> resources and how we can reduce our expenditures in ponds by using <a rel="nofollow" href="http://www.pondpro2000.com/">EPDM Liner</a>, <a rel="nofollow" href="http://www.pondpro2000.com/">Fish Ponds</a>, Pond Repair and other modern techniques. Article Source: <a href='http://www.articleseen.com/Article_Pondpro2000-that-can-increase-the-age-of-your-ponds_25329.aspx'> http://www.articleseen.com/Article_Pondpro2000 that can increase the age of your ponds_25329.aspx</a>

Article Source : http://www.articleseen.com/Article_Pondpro2000 that can increase the age of your ponds_25329.aspx

Author Resource :
Author wants to minimize the problem of pond leaks in this article. So he defines many tricks and methods to solve this problem. He also provides some guidelines that how we can utilize our pond repair resources and how we can reduce our expenditures in ponds by using EPDM Liner, Fish Ponds, Pond Repair and other modern techniques.

Keywords : Fish pond repair, pond repair, pond leaks repair, pond leaks, fix pond, EPDM liners, pond Liners,

Category : Home and Family : Gardening

Print this Article Send to Friend