Author Information
harry has 87 Published Articles

United States of America,
new york,
new york,
A2 Segensworth Business Centre,
Segensworth Road



Oil Cooler Working Strategy

Posted On : May-31-2011 | seen (906) times | Article Word Count : 487 |

Inside the engine there are hundreds of moving parts, which are made of metal and extreme heat and pressure. A good example of this is the end of the piston moves up and down inside the cylinder. Imagine a metal grinding against metal under these conditions.
All engines require a cooling system that provides heating system contains water. However, the car's high performance motor sports competition, or vehicles whose engines have to work hard to make weight or pull other vehicles have received a separate engine oil cooler. In order to avoid a third of the heat integration of the engine of a cooler reliable and powerful engine oil is spreading to all types of motor vehicles. Generally, a car's engine has two cooling systems which can be found on the top of the engine and its surrounding area. Ideally, the operating range of engine oil must be kept within 180 to 200 Fahrenheit. It is important that the oil maintain this temperature range to ensure that it will perform its intended functions correctly.
When the modern automotive engines in newly manufactured cars tend to be smaller and faster to perform than previous models, they produce more heat. Due to this maintenance of the oil temperature to an acceptable level is essential. Smaller engines have also limited the ability of the oil. This means that there is additional stress placed on all engine components and engine oil is more important to ensure a smooth conduct of each party.
How Oil Coolers Work
Oil coolers are provided with two basic models - and cooler style tube end and stacked plate heat exchangers. With tube and fin style coolers are heat produced by the engine is extracted and transported through pipes to the fins where it will be sopped with air from the cooler. Different types of tubes used by different manufacturers cooler. Some use Swizzle stick as agitators who are stuck inside the pipe to prevent accumulation of oil sludge. However, the results of this rather arbitrary and often result in minimal improvement on the overall efficiency chiller.
The stacked plate heat exchangers, however, to disperse the heat, allowing oil to flow in several passes in the interior of the stacked plates. stacked style refrigerators are designed to cool the oil down the air flow passing over multiple plates, but the elements are stacked so close together that inhibits the flow of air in the refrigerator, and not as effective as they should be. The stacked plate design oil cooler is not applicable for cars that are subjected to stressful environments, such as competitive racing.
Efficient Oil Coolers
In particular, the engine Perma-Cool cooler with its patented "turbulator" is gaining a reputation for being more effective than the tubes and stacked or style chillers. Offers many advantages and available in a variety of refrigeration equipment. The advantages that you'll enjoy with this kind of engine cooler include the following:
• The maximum cooling efficiency without compromising the flow of oil

• Reduction of oil temperature at an acceptable level

• Significant slavery engine and radiator

• Improve oil system

These are some basic characteristic of a oil coller.

Article Source : http://www.articleseen.com/Article_Oil Cooler Working Strategy_63219.aspx

Author Resource :
If you want to buy heat exchanger, cummins oil cooler ,mercruiser heat exchanger, mercruiser oil cooler so Lenco gives you the best quality products at the affordable price so When you need Heat Exchangers, Engine Oil Coolers, Fuel Coolers, Transimssion Coolers, Steering Coolers or Hydraulic Coolers Choose a LENCO.

Keywords : cummins heat exchanger, cummins oil cooler, cummins transmission cooler, mercruiser heat exchanger,

Category : Business : Small Business

Bookmark and Share Print this Article Send to Friend