|
|
Nails: Essential Fixings in Building Projects
|
|
Posted On :
Nov-03-2009
| seen (978) times |
Article Word Count :
555
|
|
There are many kinds of nails out there. Each type of these fixings serves a different purpose in building.
|
|
It cannot be denied that the most essential and the most basic of through bolts is none other than the nail. There are so many kinds of nails out there and each kind serves a different purpose. Of all the through bolts designed by people for engineering, carpentry and many other uses, the nail is probably the most important.
As much as nails are versatile materials, you need to use the right kind of nail for whatever building purpose that you have. Here is a shortlist of the most common types of nails.
1. Round wire nail. Round wire nails have large and rounded heads. They are used for most carpentry projects where stability is essential and aesthetics is not an issue.
2. Oval wire nail. This type of nail is often used in putting joints together and in other carpentry work where aesthetics is an issue. The head of an oval wire nail is so small that the nail can be easily buried into the wood.
3. Lost head nail. The lost head nail is just the same as the oval wire nail. They are also used for joints and for carpentry work that should appear smooth and seamless. The only difference is that they are often bigger and stronger than oval wire nails.
4. Annular nails. For strong and secure grips on joints, the annular nail is often used. It has sharp ridges along the shank or tail, which allow the nail to be embedded deep into the wood.
5. Cloat-head nails. Short and made of galvanised steel, cloat-headed nails are used as sleeve anchors for plasterboards and roofing. They have wide and flat heads to keep the installation stable.
6. Cut floor brad. Cut floor brads are rectangular nails that are made distinct by their L-shaped heads. They are primarily used for working on floorboards, particularly on nailing these boards to the joists.
7. Cut clasp nail. Cut clasp nails make for very strong fixings. Rectangular in shape, they are often used in nailing wood onto hard brick or stone walls.
8. Masonry nails. Masonry nails are the nails used for fastening wood panels onto brick or stone walls. They are made of steel and are very hard.
9. Panel pins. Panel pins are slender nails with tiny heads. They are used to fasten mouldings onto walls as well as for making cabinets, especially the decorative ones.
10. Springhead nails. Springhead nails are long nails with twisted shanks and a slightly domed head. They are used for fixing corrugated sheets to wooden surfaces.
11. Square twisted nails. These nails have tails that are twisted to appear like those of a screw. They are used by builders to create a stronger grip, stronger than that provided by plain, straight nails.
12. Tack. Tacks are used as through bolts for carpets on floorings and fabric on wood. They are short nails with large, flat heads.
These are just some of the common kinds of nails, the most important and the most versatile of all through bolts. There are so many of these basic sleeve anchors that this guide only skims over them.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_Nails: Essential Fixings in Building Projects_4875.aspx
|
|
Author Resource :
Do you need more information about nails and other through bolts? Please visit http://www.jgpfixings.co.uk
|
|
Keywords :
through bolts, sleeve anchors, chemical anchors,
Category :
Home and Family
:
Home Improvement
|
|
|
|
|
|
