In-line viscometer 374 Sanitary Flow Through Connector
|
|
Posted On :
Nov-24-2011
| seen (535) times |
Article Word Count :
614
|
|
SPL374 flow model-Thru sanitary viscometer, which is installed in the laboratory and process fluid lines, constantly monitoring the temperature and viscosity. Our technology is based on a simple and reliable electromagnetic concept.
|
|
SPL374 flow model-Thru sanitary viscometer, which is installed in the laboratory and process fluid lines, constantly monitoring the temperature and viscosity. Our technology is based on a simple and reliable electromagnetic concept. Two coils move the piston back and forth a constant magnetic force. The patented push-chain analysis of two-way travel time to measure the absolute viscosity.
STT-100 ®-line viscometer years of trouble free service, closed loop systems, which require constant monitoring and associated control of product viscosity. This instrument is 3A approved and has been successfully used in many food industries.
Top of the cylinder deflector, moves the liquid into the measuring chamber. This feature, together with the constant piston motion, keeps the taste fresh and mechanically scrub the camera. Built-in temperature sensor (RTD) senses the actual temperature of the measuring chamber.
SPL374 viscometer model mounts directly to a 1 / 2 "process line sanitary pipe connections. The sensor must be less than 5 ml of the sample to accurately determine the viscosity of the solution.
This small sample viscometer also has an integrated heater tight temperature control. The sample can be measured by the flow conditions, but 1 ft / sec.
13 different ranges of viscosity measurements can be carried out within the overall length from 0.2 to 20,000 cP. This allows the sensor readings will also be displayed in cSt.
Key features include:
• acurate and reliable • Durable stainless steel construction • Easy to install and operate • Proven technology • Built-in temperature control heater • Optional cooling jackets • 1 / 2 "quick disconnect plumbing equipment • Access port is easy to service
Conforms to ASTM D7483. Correlated with the ASTM D445
Technical data:
Viscosity from 0.2 to 20,000 centipoise (CP)
Piston ranges 2cP 0.2, 0.25 5cp, 0.5 10cP, 1-20cP,
50cP 2.5, 5 100cP, 10 200cP, 25 500cP,
50 to 1.000 cp, CP 100 to 2.000, from 250 to 5.000 cP,
500-10.000 CP, 1.000 to 20.000 cP
Viscosity Accuracy ± 1.0% full scale with VISCOpro 2000
The repeatability of ± 0.8% of reading
The temperature sensor 4 wire Platinum internal research, technological development and demonstration
Stainless steel wetted materials 316L and 430
Maximum particle size of 25-360 microns (belongs to the class)
* Meets 3A sanitary conditions and clean place (CIP) design
* Continuous measurement eliminates the need to "Grab" sampling and allows us to predict and constantly monitor the final product properties
* Concentric cylinder geometry ("duvet type) shear viscosity measurements are defined in terms
* Define the shear - an agreement with Brookfield Laboratory measurements of the same shear rates
* Fixed or variable speed motors
* 4-20 mA output signal provides a series of display and control capabilities
* Capable of a wide range of pressure, temperature, viscosity, flow and shear rates
* Measuring and "Zone" is protected from the main stream, and the reproducibility of measurements under variable conditions
* Tip-line maintains connections: 3 or 4 pipe fittings, sanitary, threaded or flanged
* Easy to check and maintain calibration
* Explosion Proof configuration to work in hazardous environments
|
|
|
|
Article Source :
http://www.articleseen.com/Article_In-line viscometer 374 Sanitary Flow Through Connector_109142.aspx
|
|
Author Resource :
Visit viscometer.co for all types of viscometer according to your need.
|
|
Keywords :
viscometer, digital viscometer,
Category :
Product Reviews
:
Digital Products
|
|
|
|
