How to make your own stun gun at home?

Author Information

Fabiola Castillo has 31 Published Articles

United States of America,
TX,
Austin,
1012 Anderson Ln,

How to make your own stun gun at home?

Posted On : Feb-09-2010 | seen (752) times | Article Word Count : 648 |

In today’s world personal safety is imperative. Everyone lives on the brim of life not knowing what is to be expected at the next instant. It is always wiser to be safe than sorry.

In today’s world personal safety is imperative. Everyone lives on the brim of life not knowing what is to be expected at the next instant. It is always wiser to be safe than sorry. Men and women get attacked by mobsters and thieves every other night in isolated street corners and they are rendered helpless most of the time. More so than men, it is the women who are more prone to such crimes. Crimes against women not only include petty thefts but also rape and assault. Women all around the world, especially the younger ones, are subjected to such unwanted and unscrupulous acts.

On the grounds of personal safety, there exist simple techniques of self-defense to protect oneself without outside help. You cannot always rely on the police to appear out of nowhere when you are trapped in a risky situation. One such self defense technique and the most effective one is the use of stun guns. A stun gun is a weapon that immobilizes the attacker by the passage of high voltage. However, the amperage is minimal such that no permanent damage is caused. They have become quite effective, discreet and safe to use self-defense weapons for the common man. Stun guns are normally aimed at the muscular part of the body like the buttocks, thigh, or shoulder and is to be pressed against it for a few seconds to get maximum result.

Normal stun guns available in the market can cost from $50 to $100 which is a huge amount. We could consider buying it anyways, if we did not have an alternative. Although the good news is, stun guns can be made at home by you and it would only cost up to $5. So why not learn how to make a stun gun on your own which is both competent and economical.

Following are the steps to make your own homemade stun gun:

- The things needed to build your own stun gun includes, disposable camera, screwdriver, paper clip, needle-nosed pliers and electric tape.

- With the help of the screwdriver, dismantle the plastic casing from the front of the camera. It normally pops off easily.

- Carefully separate the flashbulb out of the camera. Make sure that the circuit board, the capacitor and any other wiring is left untouched and unhampered.

- After you have separated the flash bulb off the camera, locate the two terminals of the capacitor that protrude on the either side of the place where the flash bulb was previously fitted. Bridge these terminals to drain out all the charge left. For this you can use the tip of a flat tipped screwdriver touching both the terminals at the same time.

- Take the paper clip in your hands and stretch it out into a straight piece of wire. Using the pliers cut the paper clip wire into two, at the center.

- Bend the ends of the straightened paper clip wires into a small hook and wire those hooks to the terminals of the capacitor. With the pliers, carefully close and lock the hooks into loops. This ensures that each wire is firmly fastened to either terminals of the capacitor.

- Now reattach the camera casing in the front such that the two wires protrude from the seam in the casing. The distance between the wires is ideally expected to be an inch.

- Tape the case firmly back in place on to the camera whilst you take care that the two wires do not come in contact with each other.

- Press the flash button to charge the stun gun. To pass on the charge on to a test subject simply touch both the exposed wires to it.

Thus it is ready, your own self-defense home made stun gun at minimal expense.

Re-Publish this Article

<h1>How to make your own stun gun at home?</h1> Author: <a href='http://www.articleseen.com/profile_Fabiola Castillo.aspx'>Fabiola Castillo</a> In today’s world personal safety is imperative. Everyone lives on the brim of life not knowing what is to be expected at the next instant. It is always wiser to be safe than sorry. Men and women get attacked by mobsters and thieves every other night in isolated street corners and they are rendered helpless most of the time. More so than men, it is the women who are more prone to such crimes. Crimes against women not only include petty thefts but also rape and assault. Women all around the world, especially the younger ones, are subjected to such unwanted and unscrupulous acts.

On the grounds of personal safety, there exist simple techniques of self-defense to protect oneself without outside help. You cannot always rely on the police to appear out of nowhere when you are trapped in a risky situation. One such self defense technique and the most effective one is the use of stun guns. A stun gun is a weapon that immobilizes the attacker by the passage of high voltage. However, the amperage is minimal such that no permanent damage is caused. They have become quite effective, discreet and safe to use self-defense weapons for the common man. Stun guns are normally aimed at the muscular part of the body like the buttocks, thigh, or shoulder and is to be pressed against it for a few seconds to get maximum result.

Normal stun guns available in the market can cost from $50 to $100 which is a huge amount. We could consider buying it anyways, if we did not have an alternative. Although the good news is, stun guns can be made at home by you and it would only cost up to $5. So why not learn how to make a stun gun on your own which is both competent and economical.

Following are the steps to make your own homemade stun gun:

- The things needed to build your own stun gun includes, disposable camera, screwdriver, paper clip, needle-nosed pliers and electric tape.

- With the help of the screwdriver, dismantle the plastic casing from the front of the camera. It normally pops off easily.

- Carefully separate the flashbulb out of the camera. Make sure that the circuit board, the capacitor and any other wiring is left untouched and unhampered.

- After you have separated the flash bulb off the camera, locate the two terminals of the capacitor that protrude on the either side of the place where the flash bulb was previously fitted. Bridge these terminals to drain out all the charge left. For this you can use the tip of a flat tipped screwdriver touching both the terminals at the same time.

- Take the paper clip in your hands and stretch it out into a straight piece of wire. Using the pliers cut the paper clip wire into two, at the center.

- Bend the ends of the straightened paper clip wires into a small hook and wire those hooks to the terminals of the capacitor. With the pliers, carefully close and lock the hooks into loops. This ensures that each wire is firmly fastened to either terminals of the capacitor.

- Now reattach the camera casing in the front such that the two wires protrude from the seam in the casing. The distance between the wires is ideally expected to be an inch.

- Tape the case firmly back in place on to the camera whilst you take care that the two wires do not come in contact with each other.

- Press the flash button to charge the stun gun. To pass on the charge on to a test subject simply touch both the exposed wires to it.

Thus it is ready, your own self-defense home made stun gun at minimal expense. About the Author: Fabiola Castillo is an online marketer for the website NinjaCOPS.com. This virtual store specializes in selling wholesale stun guns, kubatons, Mace pepper spray, <a rel="nofollow" href="http://www.ninjacops.com/stunmaster.html">strongest most powerful stun guns</a>, cell phone stun guns, Air Tasers, <a rel="nofollow" href="http://www.ninjacops.com/homesafety.html">home security equipment</a>, and many other self defense products. Article Source: <a href='http://www.articleseen.com/Article_How-to-make-your-own-stun-gun-at-home_10628.aspx'> http://www.articleseen.com/Article_How to make your own stun gun at home?_10628.aspx</a>

Article Source : http://www.articleseen.com/Article_How to make your own stun gun at home?_10628.aspx

Author Resource :
Fabiola Castillo is an online marketer for the website NinjaCOPS.com. This virtual store specializes in selling wholesale stun guns, kubatons, Mace pepper spray, strongest most powerful stun guns, cell phone stun guns, Air Tasers, home security equipment, and many other self defense products.

Keywords : top weight loss supplements, diet supplements full feeling, super supplements for weight loss, green nutrition supplements,

Category : Business : Business

Print this Article Send to Friend