How to make optimum use of electricity - Energy Management System
|
|
Posted On :
Oct-16-2013
| seen (2042) times |
Article Word Count :
518
|
|
The introduction of LEDs has been the most phenomenal development in the field of electrics. LEDs are much more efficient and also lasts far longer than the conventional incandescent and other fluorescent bulbs.
|
|
The introduction of LEDs has been the most phenomenal development in the field of electrics. LEDs are much more efficient and also lasts far longer than the conventional incandescent and other fluorescent bulbs. With our continuous emphasis on ensuring environmental sustainability and with a need to move to energy saving devices and systems, it resulted in the development of an array of systems for various environments like residential, garage, parking etc.
In this article we focus on different types of lighting systems and how the use of LEDs or for that matter any electrical device can be optimized by using modern day energy management systems.
LED Lighting: It is essentially a tube which uses LED diodes to emit light instead of using the conventional vacuum tubes.
The advantages of using LED lighting is well known to all of us, for example the fact that they reduce electricity consumption by 30% as compared to their counterparts. They also are nonpoisonous as against the earlier lighting systems like CFL and Fluorescent bulbs which used Mercury. It is also possible to recycle LED products like LED tubes, LED flat panels, etc. Their shelf life is longer thus giving good return on investment in the long term. The light emitted by these bulbs is directional which helps in focusing light only in the required areas rather than illuminating the whole room.
There are a lot of devices which use LED lighting like LED tubes which provide much better lighting as compared to conventional tubes and LED flat panels which are basically used for decorative purposes and are generally flush mounted on walls or ceilings, which enables them to be unobtrusive.
Induction Lighting: Induction is a proven technology and has a considerable history of nearly 100 years. Due to recent advances in Electric Generator and Ballast technologies, its production has become viable. Induction lighting is pretty similar to the traditional lighting, the only difference being instead of using electrodes it uses high frequency generator.
Induction lighting because of its extremely high luminosity, which is nearly twice that of LED it is a now a highly preferred source for street lighting, gas station lighting, and even for garage lighting. The use of induction lighting is good for the environment and it offers extremely longer life span, typically ranging from 65,000 to 100,000 hours.
Energy Management Systems: It is no longer enough to just install efficient lighting but there is a need to also improve efficiency in usage. It is for this reason that the entire industry of energy management systems evolved.
These days there are intelligent systems which monitor consumption patterns throughout the day to make changes and thereby maximize efficiency. Take for example the SP1000 system which maintains a continuous watch on electricity distribution in your house and delivers 95% efficiency rating along with guaranteed energy savings. It also protects the electric equipments in your house from fluctuations in voltage, minimizing harmonic distortions, and because it is software driven there is a real time proactive monitoring of electric consumption.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_How to make optimum use of electricity - Energy Management System_282218.aspx
|
|
Author Resource :
By embracing energy management system, you can considerably decrease the carbon footprint, while at the same time improve balance and voltage. Find out more about its benefits right here.
|
|
Keywords :
LED Lighting, Induction Lighting, Energy management system, SP1000, LED flat panels, gas station lights, parking garage light,
Category :
Product Reviews
:
Product Reviews
|
|
|
|
