How to clean your bike
|
|
Posted On :
Dec-02-2011
| seen (956) times |
Article Word Count :
545
|
|
It will take some time to lubricate the chain, so that just started, if you are sure that you have time, have to complete the process.
|
|
It will take some time to lubricate the chain, so that just started, if you are sure that you have time, have to complete the process. Follow the steps below to called the bicycle chain lube:
Step 1: Select the Lube
Before you begin, you should use the correct oil to lubricate the chain. You can ask your mechanic for advice, he will tell you which oil is suitable for your bike. The type of lubricant is used by you to affect your journey, so that the correct choice. You can also search for lubricants that will not cause spots. In addition to the lubricant, you should also buy a degreaser (you will need the degreaser in the next step).
Step 2: Cleaning the chain
Is your bike dirty? If so, you should, before proceeding (it is better on a clean bike to work, but as a dirty) to clean. You'll be prepared for dirty Sun Pants your bike thoroughly. Now invert, preferably on a newspaper. You will now clean the chain, take some water and start cleaning the bike chain. How to clean the chain? Dampen a cloth, and then hold down the chain with the rag. Well, the pedal slowly. Repeat until you feel that the chain is free of dirt (with a clean cloth for each replicate). After you have done this, take the degreaser, and apply it on your chain (this will help to remove the hidden dirt), allow the degreaser to remain for a while.
Note: You can use hot water to clean the chain, but see that you do not burn. You should also consider the teeth.
Step 3: lubing the chain
I hope that the chain is clean now. Before you start lubing, make a mark on the chain, that is your starting point. Well, listen to me carefully, take the lubricant, and slowly a drop of lubricating oil per connection. Yes, you heard right, just a drop. Some people have the habit of pouring the lube on the chain. There is no point in using more lube, how are you going off and wipes the extra lube when you're done! Once you stop the brand that you had done before achieved. Leave your bike for a while. Now, wipe the extra lubricant. How? Use the same technique you used to clean the chain, but not with water this time! You can use a clean cloth.
Step 4: Test
You'll never know whether you did a good job, unless you test your bike. Ride your bike. How does it feel? Smooth? If so, great job! If you feel that the ride is uncomfortable, then you can not have the chain properly lubricated. Go back to your garage and find out where the problem lies. Lubricate the chain again, and test it, I'm sure you have no problems this time.
Things to Remember
If your chain is rusty, not even to keep in mind, replace it immediately!
Do not choose thick greasy lubricant to your bike chain lube.
Scroll through all the gears while testing the bike.
Lubricate the chain regularly.
If you love your bike, you are certainly in good hands. The way you maintain your bike, show your love for cycling.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_ How to clean your bike_113391.aspx
|
|
Author Resource :
You may also be interested in smart trike.
|
|
Keywords :
bike, clean ,
Category :
Home and Family
:
Hobbies
|
|
|
|
