How to choose your own club

Author Information

chenjob has 114 Published Articles

Uganda,
USA,
NY,
NY,
NY

How to choose your own club

Posted On : Sep-07-2011 | seen (589) times | Article Word Count : 696 |

all brands of R , S, X the hardness of the standard is not the same, to fully integrate their swing tempo to be chosen.

Many types of shaft weight, from thirty to ninety grams of all, because it is directly related to the total club weight and swing weight, so what is the weight of the shaft using the selection is very important.

Choice was based primarily on rhythm and swing the club head speed, must have a lot of golfers have a higher level of experience: Use your swing tempo and speed of the shaft, the ball flight distance will increase; general: play Rod fast players prefer heavier the shaft, because the heavier the shaft hit the ball out of a more stable trajectory.

Reference data: club head speed of 40 m / s or so golfers, more suitable for the weight of 50 g before and after; club head speed at 43-45 m / s more suitable for golfers of weight 60-65 g; 46 m / s is more suitable for 65-70 grams.

Hardness that is the shaft of a stretch. The stability of its trajectory and ball flight distance has a very important role, in general: the more rigid shaft more stable trajectory; softer farther away. There are five sizes: Ms. L (Ladies); Amateur A (Amateur); ordinary R (Regular); hard S (Stiff); superhard X (Extra-Stiff). What is the hardness of the shaft selection swing speed of the decision should be based on: 75 miles / hour (34 m / s) the following: hardness of L; 75-85 miles / hour (38 m / s): A or R; 85-95 miles / hour (43 m / s): R or S; 95-108 miles / hour (48 m / s): S or X; 108 miles / hour or more: X or XX; Please note: all brands of R , S, X the hardness of the standard is not the same, to fully integrate their swing tempo to be chosen.

Shaft bending point is the shaft is bent, the curved part of the largest. Shaft is generally divided into: high (HP, near the handle side), middle (MP, relative to the middle), low (LP, close to the head side) bending point. It mainly affects the level and trajectory of the club head speed, to cite one more example of the image: as we all play when the leg joints (hip, knee, ankle) role.

High bend point shaft hit the ball trajectory is low, accuracy is good; and low bend point shaft higher trajectory, distance farther; choice of the bending point of the shaft should be based on players to their needs. In general, the application of high-low handicap players, the bending point, high in the handicap players for medium and low bend point shaft.

Sustaining rod force is generated by changes in the value of the steering torque is after, referred to as TQ. For slower swing speed players and the lack of strength, the torque should be selected in 5.0 above, the larger shaft torque moment of the shot, the face is easier to turn over, there will be more obvious "pumping ball "feeling, some of the more fluid swing. For fast players swing, the torque should be selected in 4.0 below, because too much torque on the rotating shaft means larger and difficult to control the ball flight direction.

However, if the torque is too small, the shaft will move (touch) moving too sensitive, when people feel very hard swing, rhythm and good control, not only from there will be losses, will be more prone to fade the ball ( Because the left side of the ball less spin).

In addition, the manufacture of carbon shaft in materials, technology also has varied: such as Honma titanium alloy used in the shaft line, as well as FUJIKURA SPEEDER shaft of the weaving method using three-axis, its mechanism are: from the rod to hit the ball this process, the shaft bending faster restitution, on the one hand can make the feeling quickly passed ball to hand, on the other hand can increase swing speed, make the ball fly farther.Want to know more golf? please login golf-clubs-wholesale.com, thank you reading. If we can with any other help, please let us know. thanks for reading.

Re-Publish this Article

<h1>How to choose your own club </h1> Author: <a href='http://www.articleseen.com/profile_chenjob.aspx'>chenjob</a>

Choice was based primarily on rhythm and swing the club head speed, must have a lot of golfers have a higher level of experience: Use your swing tempo and speed of the shaft, the ball flight distance will increase; general: play Rod fast players prefer heavier the shaft, because the heavier the shaft hit the ball out of a more stable trajectory.

Reference data: club head speed of 40 m / s or so golfers, more suitable for the weight of 50 g before and after; club head speed at 43-45 m / s more suitable for golfers of weight 60-65 g; 46 m / s is more suitable for 65-70 grams.

Hardness that is the shaft of a stretch. The stability of its trajectory and ball flight distance has a very important role, in general: the more rigid shaft more stable trajectory; softer farther away. There are five sizes: Ms. L (Ladies); Amateur A (Amateur); ordinary R (Regular); hard S (Stiff); superhard X (Extra-Stiff). What is the hardness of the shaft selection swing speed of the decision should be based on: 75 miles / hour (34 m / s) the following: hardness of L; 75-85 miles / hour (38 m / s): A or R; 85-95 miles / hour (43 m / s): R or S; 95-108 miles / hour (48 m / s): S or X; 108 miles / hour or more: X or XX; Please note: all brands of R , S, X the hardness of the standard is not the same, to fully integrate their swing tempo to be chosen.

Shaft bending point is the shaft is bent, the curved part of the largest. Shaft is generally divided into: high (HP, near the handle side), middle (MP, relative to the middle), low (LP, close to the head side) bending point. It mainly affects the level and trajectory of the club head speed, to cite one more example of the image: as we all play when the leg joints (hip, knee, ankle) role.

High bend point shaft hit the ball trajectory is low, accuracy is good; and low bend point shaft higher trajectory, distance farther; choice of the bending point of the shaft should be based on players to their needs. In general, the application of high-low handicap players, the bending point, high in the handicap players for medium and low bend point shaft.

Sustaining rod force is generated by changes in the value of the steering torque is after, referred to as TQ. For slower swing speed players and the lack of strength, the torque should be selected in 5.0 above, the larger shaft torque moment of the shot, the face is easier to turn over, there will be more obvious "pumping ball "feeling, some of the more fluid swing. For fast players swing, the torque should be selected in 4.0 below, because too much torque on the rotating shaft means larger and difficult to control the ball flight direction.

However, if the torque is too small, the shaft will move (touch) moving too sensitive, when people feel very hard swing, rhythm and good control, not only from there will be losses, will be more prone to fade the ball ( Because the left side of the ball less spin).

In addition, the manufacture of carbon shaft in materials, technology also has varied: such as Honma titanium alloy used in the shaft line, as well as FUJIKURA SPEEDER shaft of the weaving method using three-axis, its mechanism are: from the rod to hit the ball this process, the shaft bending faster restitution, on the one hand can make the feeling quickly passed ball to hand, on the other hand can increase swing speed, make the ball fly farther.Want to know more golf? please login http://www.golf-clubs-wholesale.com, thank you reading. If we can with any other help, please let us know. thanks for reading.About the Author: Choice was based primarily on rhythm and swing the <a rel="nofollow" href="http://www.golf-clubs-wholesale.com/Callaway-FT-iz-Driver-Wholesale_641.html">callaway ft-iz driver</a>, 
Reference data:<a rel="nofollow" href="http://www.golf-clubs-wholesale.com/Titleist-2010-AP2-Irons-Wholesale_41.html">titleist ap2 irons</a> head speed of 40 m / s or so golfers, please login <a rel="nofollow" href="http://www.golf-clubs-wholesale.com/">http://www.golf-clubs-wholesale.com</a>, thank you reading. Article Source: <a href='http://www.articleseen.com/Article_How-to-choose-your-own-club_80274.aspx'> http://www.articleseen.com/Article_How to choose your own club _80274.aspx</a>

Article Source : http://www.articleseen.com/Article_How to choose your own club _80274.aspx

Author Resource :
Choice was based primarily on rhythm and swing the callaway ft-iz driver,
Reference data:titleist ap2 irons head speed of 40 m / s or so golfers, please login http://www.golf-clubs-wholesale.com, thank you reading.

Keywords : cheap, golf, discount,

Category : Arts and Entertainment : Arts and Entertainment

Print this Article Send to Friend