How to Change a Projector Lamp?
|
|
Posted On :
Aug-13-2011
| seen (669) times |
Article Word Count :
462
|
|
Between diversification of computer crime, the use of cookies and the resurgence of industrial espionage, the number of businesses looted skyrocketing. How to protect themselves against this malicious increased? How to avoid abuses such as leaks of confidential data? For between intelligence and industrial espionage
|
|
A multimedia projector is an expensive device but will last several years, provided the replacement projector lamp when necessary. Indeed, the life of projector lamps can be affected by a number of factors. The heat created by the lamp itself can be enough to weaken, so it is important to place the unit in a well ventilated, and especially not to impede the flow of air. Dust off the projector regularly is also essential, because the dust also would interfere with the airflow. This is also why the projectors are equipped with dust filters, which must be changed regularly. Although these few simple steps can help you extend the life of your lamp projector, a time will come when you will have to change it, like any light bulb. To do this, nothing very complicated, if not a method to use, allowing you to change your projector lamp easily and without risking damage to either the lamp or the camera.
First, make sure you operate on a clean and tidy, a table for example, and make sure the unit is turned off and unplugged. It is anyway advisable to disconnect all cables when changing a light projector.
Be sure you choose the right lamp to replace the one that no longer works. To do this, it is best to turn to a professional who provides original projector lamps, obtained from the manufacturer.
The lamp access on your device should be fairly simple to find. To clear the lamp, you can usually get a handful or unscrew a specific compartment. Do not hesitate to consult the manual user of your projector, you'll need to maintain throughout the life of your device.
Remove the old lamp and take the opportunity to change, if any, the dust filter and clean the inside of the lamp compartment by using a dry microfiber cloth.
You can now install the new projector lamp, taking care not to put your fingers on the glass, which alter the quality of the image.
You can close the compartment and reconnect your device.
This procedure is only valid if you change the entire lamp. If you need only replace the bulb, after taking the first steps outlined above, and are sure to have thoroughly cleaned the compartment, you should unscrew the bulb and release all its cables. If you are not sure you can recall the connection setup, feel free to Rate! A screwdriver should be sufficient for any disconnect. Then just mount the new bulb in the same way as the old, and replace the lamp compartment in the device. A little caution though: Do not handle the new bulb with bare hands and feel free to wear gloves to avoid depositing any fingerprints.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_How to Change a Projector Lamp?_73522.aspx
|
|
Author Resource :
For more useful tips & hints, please browse for more information at our website:-
Windows Live Messenger
Pirate Bay Database
|
|
Keywords :
TECHNOLOGY, GADGETS, SOFTWARES, HARDWARE, WINDOWS,
Category :
Computers
:
Hardware
|
|
|
|
