|
|
How to Buy a Fire Fighting Water Pump
|
|
Posted On :
Jan-23-2017
| seen (978) times |
Article Word Count :
488
|
|
Are you preparing your home or property for fire season? Then, it’s the right time to find a product that defends your home against fire damage. Though, water pumps are the important irrigation supplies in Perth, they also play a major role in fighting fire and saving your property against any costly damages.
|
|
Are you preparing your home or property for fire season? Then, it’s the right time to find a product that defends your home against fire damage. Though, water pumps are the important irrigation supplies in Perth, they also play a major role in fighting fire and saving your property against any costly damages. But, remember, a water pump designed for saving a sinking boat cannot be the best one for putting out a fire. Buying the right fire fighting water pumps helps you to fight fire effectively and put the fire out completely. The fire fighting water pumps can also be used for irrigation purposes and for other jobs that need pressurised water.
So, here we have compiled a whittled list of factors to consider while buying a fire fighting water pump in Perth.
Performance Characteristics
The following performance characteristics of the fire fighting water pumps should be seriously taken into consideration to ensure maximum performance:
Pressure
The water pumps that are to be used for fire fighting and irrigation wash down should have a high pressure of about 100PSI or above. When comparing to a regular garden hose dispensing water, the pressure value of fire fighting water pump is very high. This high pressure plays a major role in putting out the fire.
Flow Rate
The flow rate of the fire fighting water pump should be between a 200 litres per minute and 1000 litres per minute.
Maximum Head
Maximum head is nothing but the maximum height the pump can pump water to. Consider the difference in height between the pump and where you are pumping the water to determine the maximum head value for the pump.
Inlet/Outlet Size
The inlet or outlet size of fire fighting water pumps should be between 1? to 4?. But, if the size of the outlet is larger, the quicker the job will get done.
Physical Characteristics of Fire Fighting Water Pumps
- The pumps ability to retain water determines the self-priming capability of a pump. This capability can reduce air blockage and makes sure your pump is ready to fight fires when you need it most.
- The fixtures of the fire fighting water pumps like the delivery outlet caps and body should be made of metal to avoid any costly repairs.
- Pick a quality engine to power your pump and ensure that these engines are backed by extensive national service networks of accredited agents all over the country, so that you can find help easily whenever your pump needs to be repaired or serviced.
- Also, avoid choosing mains-powered electric pumps and switch to petrol or diesel powered. This because, they are cheaper, can perform for longer and are considered as a safer option compared to mains-powered electric pumps.
If you are looking for fire fighting water pumps in Perth, visit ruralfencingsupplies.com.au/pumps now!!
|
|
|
|
Article Source :
http://www.articleseen.com/Article_How to Buy a Fire Fighting Water Pump_320421.aspx
|
|
Author Resource :
The author of this article is a leader in the plumbing industry, supplying a wide range of water pumps and other irrigation supplies in Perth at a low cost. In this article, he writes about the importance of fire fighting water pumps and provides useful tips to choose them. Visit http://ruralfencingsupplies.com.au for more information.
|
|
Keywords :
irrigation supplies in Perth, water pumps in Perth,
Category :
Business
:
Business
|
|
|
|
|
|
