Home Inspections
|
|
Posted On :
Dec-02-2011
| seen (393) times |
Article Word Count :
866
|
|
When you have a home inspected, the inspector will examine the structures and systems that make the house what it is. Of course, it will examine the wooden structures such as floors, walls, doors and windows.
|
|
When you have a home inspected, the inspector will examine the structures and systems that make the house what it is. Of course, it will examine the wooden structures such as floors, walls, doors and windows.
There are four things that can cause structural problems in the wood. They are: 1) warping and deflection, 2), fungal and insect attacks, 3) Fire, and 4) Connection failed, and the rest wrong. In this article, to know deformation and subsidence.
What does it mean when the floors, walls or ceiling to deform and collapse? Problems or failure of the wooden structures usually involve individual members and does not necessarily mean that the entire structure will fail. In stressful situations, there is some degree of elastic adjustment happens, focusing on other parts of the building.
A little distortion in the wood can not be a big problem unless it causes a structural weakness in the connections or the causes of waterproof seals are separated in places like the roof. Warped wood can not be rectified, but the addition of additional support can prevent the problem worse.
However, adding support is not always necessary or desirable. The inspector will check for bends or sloping floors and cracking or tilting of the foundation walls, pillars and columns. It can help you determine if something can be done.
Floors sometimes sag or slope as a result of a renovation project before in areas like the kitchen or bathroom that give more weight to the ground of what is supposed to contain. Your inspector can help you decide if it is nothing more than a nuisance or a structural problem that must be taken seriously.
Your home inspector to check for signs of retaining walls, which were taken away. He checked for lack joist hangers as well as cuts or holes in the bars to do the plumbing, electrical, heating or air conditioning lines or channels. He will also look for signs of attack by insects or fungi.
The ground can sink near the openings of stairs, especially in older homes, but is not necessarily a serious problem. Trying to fix the problem would be difficult due to the whole around the staircase is distorted or deformed. However, if a retaining wall below was taken, the addition of a support column as needed.
The ground can sink into the door jambs for the lack of support or for worse. If necessary, reinforcements can be added between the rafters, where the collapse is, but can be difficult if you are above a finished ceiling.
If there are cracks in the walls around the holes inside the house, which could be caused by a number of things. The framework may be inadequate, deviant or distorted. The house could be the solution, or maybe there is a problem with the walls of brick or masonry exterior of the house. If the crack is due to problems with the frame, usually not too serious. It is likely that looks worse than it is. Repair for aesthetic reasons, would break the wall.
Sloping or sagging of the roof can be caused by several things. It can not be too many layers of roofing material. Three or more additional load of shingles dead. These problems may be due to the failure of fire retardant plywood roof cladding, reinforcement inadequate or undersized rafters. Fire retardant plywood on the wall are divided into a second home may seem dark inside as if it were charred. This is a sign must be replaced.
The roof can also be SAG, the story attic is converted into living space if the collar beams or knee walls were removed. More snow and wind loads, or poor design and construction errors can also contribute to the problem.
If a roof is spreading downwards and outwards, inadequate tying may be the culprit. This is not too common, but serious when it happens. Your inspector is looking for missing collar beams, low beams and tying the rafters at the eaves, or lack of commitment of the rafters that are members of the voltage on one side of the roof to another. Altered trusses can cause this problem also.
It may be appropriate to stop the spread of a stimulant or a tie. If you do not mind a brick wall under the eaves, it is possible, the roof can be intercepted in its correct position. Structural engineer should be consulted on this project.
If the collapse of the flat roof, may be due to an overload, a too large support beams, or the poor under the same roof. No matter, unless the roof leaks. If water pools on the roof, however, the dead load may be too high, which could cause problems. The roof may be necessary to reinforce or by revealing.
There is much to consider when it comes to wooden structures of a house. This is why it is so important to have a home inspection done before buying or selling a home to determine the status of these structures and show the way to correct all problems can be treated.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_Home Inspections_113266.aspx
|
|
Author Resource :
South Florida Home Inspection is an expanding business located in Palm Beach County. Joe Cosentino is a licensed and insured home inspector and mold assessor. Joe is also a proud member of the National Association of Certified Home Inspectors and also of the Indoor Environmental Air Quality Council.
|
|
Keywords :
South Florida Home Inspection,
Category :
Home and Family
:
Home Improvement
|
|
|
|
