Gravel Production Line for sale
|
|
Posted On :
Nov-21-2011
| seen (495) times |
Article Word Count :
671
|
|
Natural sand and gravel resources dwindling, making high-quality sand and gravel resources have gradually turned to artificial production. This is a trend, but also a necessity...
|
|
Natural sand and gravel resources dwindling, making high-quality sand and gravel resources have gradually turned to artificial production. This is a trend, but also a necessity. A sustainable society, green living environment needs more people to consider how comprehensive and efficient use of resources. In fact, sources of raw materials used in manufacturing a wide range of sand, all kinds of ore, weathered rock, river pebbles, mine tailings, slag and so can be used as the source. With years of domestic and foreign production of artificial gravel aggregate for all types of engineering tests show very good performance of artificial sand, in no way inferior to natural resources. professional system design and manufacturing company, has for many years closely around the state made the right direction, policy-oriented to market needs as the center, pool technology, continuous innovation design and manufacture a series of special crushing mechanism sand equipment series. The river gravel Sand is always best-selling market since the beginning of production of main products. Acer mining machine design and manufacture of system sand machine has the following advantages can: gravel crusher machine
First, river gravel Sand machine air from circulating within the vortex chamber, dust pollution.
Second, install the bearing with a unique design with advanced spindle, so that the machine has the characteristics of heavy and high-speed rotation.
Third, the structure is simple and reasonable, since the strike breakers, the use of low cost.
Fourth, high reliability, tight security devices, to ensure that equipment and personal safety.
Fifth, the system has a crushing machine sand, coarse grinding function.
Sixth, river gravel Sand machine running smoothly, work noise, energy efficient, high crushing efficiency.
Seven, the vulnerability of low-loss, all wearing parts are high quality wear-resistant materials used at home and abroad, long service life. A small amount of wear parts made of wear-resistant material with a special hard, small size, light weight, easy to replace parts.
Eight, by the moisture content of the material is small, the water content up to about 8%. gravel production line
Sand Machine installation:
1, sand making machine installed in the concrete foundation or steel, based on the foundation should be able to withstand four times the weight.
2, according to the airport to different broken. Installed in the plant operation or installed in the open operation. Installation should be leveling the crusher to the vertical and horizontal axis.
3, the system should be set above the sand machine lifting equipment, lifting equipment, the largest capacity crusher parts by weight considerations, the system should be left above the sand lifting machine room, machine side of the sand to stay in the system, adequate space to prepare for maintenance during the event.
Sand machine debugging:
River Sand Pebbles machine in the factory, the manufacturer has little time for 8 load operation, the ministries is normal, however, live in the sand making machine after installation, should conduct a comprehensive inspection.
1, Check the oil pipe is connected securely, plus a re-commissioning before the oil.
2, check the connection of the parts should be solid and reliable, carefully check the impeller for foreign objects, if any should be immediately removed.
3, check the motor wiring is correct, the voltage is normal (380V ± 5%).
4, the installation of the belt before you start the motor, rotating sand machine to the system should be signs in the same direction (that is, from the mouth to see the feed, impeller counter-clockwise rotation) if it signs in the opposite direction, the motor wiring should be adjusted so that rotation and signs in the same direction, never allowing the anti-rotation.
5, for the two-motor drive, spindle assembly and both sides of the motor, respectively, with the same number of triangular belt and spindle assembly connected to both sides of the triangle should be adjusted the same belt tensioning and straight. After the check, after the transfer of production, first for empty load and load test, the test to confirm no problem and then transferred to production.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_Gravel Production Line for sale_107302.aspx
|
|
Author Resource :
Sand washing machine for sale,
gravel production line,
gravel crusher machine
|
|
Keywords :
gravel crusher, gravel production line,
Category :
Business
:
Marketing
|
|
|
|
