|
|
Feeder safety standards
|
|
Posted On :
Nov-13-2011
| seen (1430) times |
Article Word Count :
431
|
|
This standard specifies the feeder design, manufacture, installation, use and maintenance aspects of the basic safety requirements.
This standard applies to electromagnetic vibrating feeder, vibrating feeder inertia and other forms of feeder equipment itself, does not include the connection of such equipment components.
|
|
This standard specifies the feeder design, manufacture, installation, use and maintenance aspects of the basic safety requirements.
This standard applies to electromagnetic vibrating feeder, vibrating feeder inertia and other forms of feeder equipment itself, does not include the connection of such equipment components.
If the device is used to transport hazardous, toxic and other hazardous materials used in the order to the user declared by the manufacturer, the manufacturer shall submit installation units shall comply with the special security conditions.
2 References
GB 5083 Equipment Design General Safety and Health
3 design, manufacture
3.1 Feeder should be designed to comply with GB 5083 in the provisions of 1.1, 1.3 to 1.6,
3.2 should ensure that equipment under normal operating conditions with sufficient strength, and should consider the dynamic stress effects.
3.3 bolts should have a reliable anti-rotation.
3.4 Feeder must be met to stop working when the transport of materials do not fall.
3.5 pairs of mechanical moving parts, especially the inertia of the rotating eccentric vibrator protective devices should be set.
3.6 in the fully enclosed equipment should be equipped with self-locking device with inspection holes or live cover.
3.7 load noise level shall not exceed 85 dB (A).
4 Installation
4.1 should be installed in to the feeding trough at the plate and on the device.
4.2 Suspension or supporting feeder rack should have sufficient stiffness to avoid boom-degree contacts with other objects.
4.3 mounted on mobile rack feeder shall be equipped with a stop device. Additional wheel in the operator easy access by the protective devices should be added.
4.4 When the operator must remain in the mobile device must be installed platform, the platform should be able to prevent the operator in contact with any obstacle.
4.5 When a mobile feeder channel running along the unprotected alarms should be installed.
4.6 Feeder must be grounded to protect.
5 operation, maintenance
5.1 users should install the maintenance manual provided with the operating conditions, should avoid overload.
5.2 Mobile running along the feeder channel, when the run rate of more than 0.10m / s, the run must be started in audio-visual warning devices.
5.3 electromagnetic vibrator shall state in the core and the convergence of the collision run.
5.4 Inertia eccentric vibrator shall not remove the guard to run the state.
5.5 caused by a blockage or other reasons need to clean up, you must stop and start the feeder after the device off.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_Feeder safety standards_103588.aspx
|
|
Author Resource :
vibrating feeder design Feeder
|
|
Keywords :
Feeder safety standards,
Category :
Business
:
Public Relations
|
|
|
|
|
|
