Creating Graphics for a Trade Show Display

Author Information

Cindy French has 6 Published Articles

United States of America,
MN,
Burnsville,
2401 Hwy 13 W,

Creating Graphics for a Trade Show Display

Posted On : Jul-26-2011 | seen (390) times | Article Word Count : 435 |

Whether you are setting up a tabletop or a floor-standing popup display, the steps and components will be the same. Either way, you will quickly be off to take care of the many aspects of a trade show more important than setting up.

Whether you are setting up a tabletop or a floor-standing popup display, the steps and components will be the same. Your first step should be to locate the expanding, "popup" frame. You will need to set-up the frame so that the top/front is erected correctly. The popup hubs, what the aluminum-grade frame poles connect into, will house several button magnets, similar in size to a watch battery. Most of the hub magnets will be flush with the hub but there is a row of hub magnets that protrude from the hub, this is the top of your frame. The protruding hub magnets will act as an “anchor” for your mural or fabric panels which have an opposite polarity button magnet at the top of each. The front of the frame will be the side with numerous magnets installed in the vertical sections of the frame, in place so the channel bars can attach.

Once the frame is in place you will need to locate the channel bars; these provide the magnetic stripping for the panels to cling to. The channel bars will fit into the frame in every vertical section including the first vertical section on the back of the frame on both sides, for the wrap-around end panels to cling to. You will notice that the frame becomes much more rigid once all the channel bars are in place. Now you are ready to attach your panels.

There will be two widths of the panels in your popup display package: center panels and wrap-around end panels. The best way to have your booth align correctly is to start with a center panel on one end of the frame and work your way across the booth. If working left to right, the best practice is to attach the left top button magnet to the protruding top frame magnet and attach the left side of the panel to the frame completely before attaching the other side. This will continue with the rest of the panels and you will be able to nudge the left side of the panels to align with its neighboring panel. Once all the center panels are in place, you are set to attach the end panels. The end panels are easily attached to the frame by connecting the front side of the panel first, completely from top to bottom, and then wrapping the panel around to the back side of the frame. Having two people on the panel is always best with this step. The panels will “hug” to the frame and your booth will be complete.

Re-Publish this Article

<h1>Creating Graphics for a Trade Show Display</h1> Author: <a href='http://www.articleseen.com/profile_Cindy French.aspx'>Cindy French</a> Whether you are setting up a tabletop or a floor-standing popup display, the steps and components will be the same. Your first step should be to locate the expanding, "popup" frame. You will need to set-up the frame so that the top/front is erected correctly. The popup hubs, what the aluminum-grade frame poles connect into, will house several button magnets, similar in size to a watch battery. Most of the hub magnets will be flush with the hub but there is a row of hub magnets that protrude from the hub, this is the top of your frame. The protruding hub magnets will act as an “anchor” for your mural or fabric panels which have an opposite polarity button magnet at the top of each. The front of the frame will be the side with numerous magnets installed in the vertical sections of the frame, in place so the channel bars can attach.

Once the frame is in place you will need to locate the channel bars; these provide the magnetic stripping for the panels to cling to. The channel bars will fit into the frame in every vertical section including the first vertical section on the back of the frame on both sides, for the wrap-around end panels to cling to. You will notice that the frame becomes much more rigid once all the channel bars are in place. Now you are ready to attach your panels.

There will be two widths of the panels in your popup display package: center panels and wrap-around end panels. The best way to have your booth align correctly is to start with a center panel on one end of the frame and work your way across the booth. If working left to right, the best practice is to attach the left top button magnet to the protruding top frame magnet and attach the left side of the panel to the frame completely before attaching the other side. This will continue with the rest of the panels and you will be able to nudge the left side of the panels to align with its neighboring panel. Once all the center panels are in place, you are set to attach the end panels. The end panels are easily attached to the frame by connecting the front side of the panel first, completely from top to bottom, and then wrapping the panel around to the back side of the frame. Having two people on the panel is always best with this step. The panels will “hug” to the frame and your booth will be complete. About the Author: <a rel="nofollow" href="http://www.dotradeshow.com/default.aspx">Trade Show Displays</a> Inc., <a rel="nofollow" href="http://www.dotradeshow.com/products/pop-up/popup_10Feet.aspx">10' Pop-ups</a>, <a rel="nofollow" href="http://www.dotradeshow.com/products/popup.aspx">Pop-up Displays</a> Article Source: <a href='http://www.articleseen.com/Article_Creating-Graphics-for-a-Trade-Show-Display_68958.aspx'> http://www.articleseen.com/Article_Creating Graphics for a Trade Show Display_68958.aspx</a>

Article Source : http://www.articleseen.com/Article_Creating Graphics for a Trade Show Display_68958.aspx

Author Resource :
Trade Show Displays Inc., 10' Pop-ups, Pop-up Displays

Keywords : trade show displays, trade show display, trade show exhibits, trade show booth, portable trade show booths, display stands, t,

Category : Business : Marketing

Print this Article Send to Friend