Copper Iron ore Steel Slag Powder Processing Equipment
|
|
Posted On :
Nov-13-2011
| seen (364) times |
Article Word Count :
506
|
|
splashing cold plate method (ISC method): Set in an elevated splashed slag slag plant tray, the use of crane tank liquid slag slag slag pouring plate...
|
|
1. hot pour method: just out of steel furnace slag melt down scum tank, the vehicle transported to the hot slag poured workshop, the use of crane tank liquid slag slag layer poured down in bed or slag slag pit. appropriate water spray, so that high-temperature slag quench fragmentation and accelerated cooling, and then use the loaders, mining shovels and other equipment for loading, and then transported to spoil the market. Need to play is transported to the processing and utilization of slag processing plant for crushing, screening, magnetic separation, etc. Process.
2. splashing cold plate method (ISC method): Set in an elevated splashed slag slag plant tray, the use of crane tank liquid slag slag slag pouring plate, the slag layer is generally 30 ~ 120mm thick, and then spray the right amount of water to promote quench fragmentation. Slag in the slag and then overturned car, drove to the pool water temperature, and then unloaded to the residue to further cool the cooling pond. Sediment than the degree is generally 5 ~ l00mm. Finally, grab them out loading, sent to the slag processing plant. For magnetic separation, crushing, screening, finishing. iron ore crusher
3. the slag water quenching method: hot slag in the outflow decreased during the pressure of water is divided, crushed, plus slag quench water shrinkage stress concentration and cracking, so the slag granulation. As the liquid slag viscosity, the difficulty of large water quenching. To prevent explosions, and some use of slag pot hole in the water residue and ditch water quenching method to limit the maximum aperture through the slag pot slag flow.
4. wind quenching method: access slag slag Mindanao, the Department sent to wind quenching device, tipping slag pots, slag can flow through the middle, by a special nozzle to disperse the air, broken into particles, In the bell-type heat recovery boiler slag particles in the air and the heat and capture the slag particles. After quenching from the wind converter slag particles, can be used for building materials; a boiler temperature of steam generated in the oxide scale can be used for drying.
5. steel slag powder processing method: The process also known as hot-boring method is to just solidified slag is still in the high temperature and poured into a large closed pot in water, the water at high temperatures to produce steam. As for the compounds of the slag contains free lime, calcium hydroxide with water to generate and produce swelling, cracking and thus to promote slag powder. 0.3mm steel slag powder ratio to less than 50% to 80%. This approach can improve the stability of slag. And reduce the amount of slag crushing process, while reducing equipment wear.
Slag grinding equipment
Slag slag grinding equipment is in need of treatment process equipment. Common grinding equipment including steel slag slag and steel slag crusher mill. There slag crusher jaw crusher, impact crusher, cone crusher, mobile crusher and so on. There slag mill ball mill, Raymond mill, vertical mill, jet mill and so on.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_Copper Iron ore Steel Slag Powder Processing Equipment_103663.aspx
|
|
Author Resource :
Slag Powder Grinding machine,
Iron ore crusher,
Jaw crusher
|
|
Keywords :
iron ore crusher, steel slag processing equipment,
Category :
Business
:
Marketing
|
|
|
|
