|
|
Cf rotor : New generation air compressor
|
|
Posted On :
Jul-06-2011
| seen (872) times |
Article Word Count :
473
|
|
The flettner rotor vessel is also available in the form of a Roots blower Compressor, The discharge air pressure, obtained from this similar kind of machine is very low. The discharge pressure of one bar can obtain in single stage and the pressure of 2bar from double stages.
|
|
Most of us who deals with the knowledge of the history of the mechanical technological revolution, knows about Anton Flettner. Mr. flettner built this revolutionary machine popularly known as flettner rotor vessel . The innovation was called brilliant because the rotors proved very much effective even in bad weather conditions. The inbuilt system of the rotors suddenly came out with a design flaw, within a few years of its innovation. When compared to the traditional engines, the efficiency levels of the rotor vessel proved much weaker. Gradually with the passage of time, the efficiency of the rotor vessel proved much weaker, so Flattner came up with an innovation.
There are various types of compressors used in the industrial and transportation sector. The cf rotor is one of them. Positive displacement types of compressor, who is mechanically displacing a fixed volume of air. The rotary compressor is compressed by two simultaneous rotors or intermeshing rotors. In this type of construction of the rotor, there are two types of it. They are the rotary screw compressor and the Rotary Vane Compressor. The previous one, works when air is compressed between two rotating screw, popularly known as male and female screws. The compression takes place gradually, reducing the space between two parts.
The flettner rotor vessel or rotor ship is primarily designed for the purpose of propulsion with the Magnus effect. The sails of the rotor are utilized to make the most effect. This is known as the Magnus effect, which actually refers to the thrust that is made to operate over a spinning device. The motor is designed in such a manner that it operates in the direction of the wind. The primary advantage of a telescopic flettner rotor is that it can automatically fold and also collapse simultaneously. It can navigate in a limited area. The technology used behind the telescopic flettner rotor is very much sophisticated. The demand of this telescopic variety has increased to large extent. It is almost dramatic. As far as the foldable rotor goes, it was the same German scientist, who first used it in an airship.
The cf rotor is such a kind of machine that each movement compresses a fixed quality of fixed air at a specific pressure. There is the single and the double stage or it could be the multiple stage and there is the single or double action is the further classification of reciprocating. The Dynamic type of the air compressors are mechanically imparted velocity. This future action is produced by the impellers rotating at very high speeds. This remains in an enclosed casing. A centrifugal compressor is where an impeller is mounted on a shaft and postponed within housing, consisting of an inlet duct. After joining hands with some fellow engineers he gradually developed a much better version of the machine.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_Cf rotor : New generation air compressor_65277.aspx
|
|
Author Resource :
Issac Gates is a financial advisor who have good information on Flettner rotor vessel & cf rotor. For more information he recommends to visit http://www.windagain.com/
|
|
Keywords :
cf rotor, flettner rotor vessel,
Category :
Business
:
Management
|
|
|
|
|
|
