Butane Lighter Care

Author Information

Dave Sabot has 32 Published Articles

United States of America,
FL,
Tampa,
217 Hobbs St. ,

Butane Lighter Care

Posted On : Oct-08-2009 | seen (957) times | Article Word Count : 379 |

Butane lighters are available in models which are made for use in rugged environments. A wind resistant lighter used to mean fluid-filled but today's gas-filled lighters can provide reliable service in conditions which would make a cheaper lighter useless. Making certain they work as intended does require that one pay attention to the proper maintenance of their lighter and that starts with the fuel one uses.

There are butane lighters which are specifically designed for outdoor use. These are mostly windproof lighters which can be used to light a cigar, pipe or cigarette even in the most extreme conditions. These require care though they are very durable.

The mechanics, where the user is concerned, are easy to understand. The lighter has a receiver which is used to refill the reservoir with butane. This receiver will only accept a standard can of butane. No other fuel should be used in these lighters and any adapter that doesn't readily fit should not be made to do so by force. Doing so can destroy the lighter.

Make certain to only use fuel which is specifically designed for use in butane lighters. The adapter on the can is generally the best way to determine if one has the right fuel. The adapter should slide into the receiver on the bottom of the lighter with little or no effort. If this is not the case, chances are that one has the wrong fuel for the job and attempting to make it fit by forcing the nozzle is dangerous for both the user and the lighter itself. Never use a fuel other than butane in any butane lighter.

If a lighter fails to light after refueling, bleed off any air that may be trapped in the reservoir by depressing the gas release without turning the flint. One usually need do this for only a second or two to restore flow. Even if a lighter has been refueled some time ago, there may be air trapped in the system that can cause intermittent failure. If this doesn't work, check the jet area for any obstructions and the flint for anything that may have become lodged in the mechanism. If the lighter has an electric igniter, refer to the service manual for instructions.

Re-Publish this Article

<h1>Butane Lighter Care</h1> Author: <a href='http://www.articleseen.com/profile_Dave Sabot.aspx'>Dave Sabot</a> Butane lighters are available in models which are made for use in rugged environments. A wind resistant lighter used to mean fluid-filled but today's gas-filled lighters can provide reliable service in conditions which would make a cheaper lighter useless. Making certain they work as intended does require that one pay attention to the proper maintenance of their lighter and that starts with the fuel one uses.

There are butane lighters which are specifically designed for outdoor use. These are mostly windproof lighters which can be used to light a cigar, pipe or cigarette even in the most extreme conditions. These require care though they are very durable.

The mechanics, where the user is concerned, are easy to understand. The lighter has a receiver which is used to refill the reservoir with butane. This receiver will only accept a standard can of butane. No other fuel should be used in these lighters and any adapter that doesn't readily fit should not be made to do so by force. Doing so can destroy the lighter.

Make certain to only use fuel which is specifically designed for use in butane lighters. The adapter on the can is generally the best way to determine if one has the right fuel. The adapter should slide into the receiver on the bottom of the lighter with little or no effort. If this is not the case, chances are that one has the wrong fuel for the job and attempting to make it fit by forcing the nozzle is dangerous for both the user and the lighter itself. Never use a fuel other than butane in any butane lighter.

If a lighter fails to light after refueling, bleed off any air that may be trapped in the reservoir by depressing the gas release without turning the flint. One usually need do this for only a second or two to restore flow. Even if a lighter has been refueled some time ago, there may be air trapped in the system that can cause intermittent failure. If this doesn't work, check the jet area for any obstructions and the flint for anything that may have become lodged in the mechanism. If the lighter has an electric igniter, refer to the service manual for instructions.About the Author: Dave Sabot is the owner of an online specialty <a rel="nofollow" href="http://www.buylighters.com">butane lighters</a> store. With expert knowledge of cigar accessories, including <a rel="nofollow" href="http://www.buylighters.com/Windproof-Lighters_c_24.html">windproof lighters</a>s, Dave also authors a premier <a rel="nofollow" href="http://buylightersblog.com/category/lighter-reviews/">cigar lighter reviews</a> blog. Article Source: <a href='http://www.articleseen.com/Article_Butane-Lighter-Care_3960.aspx'> http://www.articleseen.com/Article_Butane Lighter Care_3960.aspx</a>

Article Source : http://www.articleseen.com/Article_Butane Lighter Care_3960.aspx

Author Resource :
Dave Sabot is the owner of an online specialty butane lighters store. With expert knowledge of cigar accessories, including windproof lighterss, Dave also authors a premier cigar lighter reviews blog.

Keywords : cigars, lighters, cigar lighters, zippo, zippo lighters, butane lighters, Hobbies, Lifestyle, Leisure, Relaxation, Educationa,

Category : Home and Family : Hobbies

Print this Article Send to Friend