|
Broke your iPhone 7? Visit the Technician Shop!
|
Posted On :
Mar-23-2019
| seen (791) times |
Article Word Count :
439
|
|
Have you ever experienced the moment your iPhone 7 slips out of your hands and makes its way towards the ground and the dreaded cracks begin to climb their way up the screen?
|
Have you ever experienced the moment your iPhone 7 slips out of your hands and makes its way towards the ground and the dreaded cracks begin to climb their way up the screen? Visit the right mobile repair shop that specialises in iPhone repairs in Sydney with your phone for services!
Step By Step iPhone Replacement Process by Professionals
- Initial iPhone Inspection
- Removing Bottom Screws and Screen
- Disconnecting The Battery
- Removing Display Assembly
- Removing Home Button/Touch I.D
- Remove Earpiece Speaker
- Remove Front Camera and Sensory Cable
- Remove LCD Shield Plate
- Reattaching LCD Shield
- Re-Installing Home Button/Touch I.D
- Transplanting the Earpiece Speaker, Front Camera, Sensory Cable and Flex Assemblies
- Reattach Sensory panel
- Screen Test
- Reconnect PCB Connectors
- Fix The New Screen
How a Technician will help you?
IPhone 7 screen replacement Sydney will be the most common repair a technician usually does.
First the technician will go for initial iPhone and its frame inspection to the level of damage the screen has gained. Open up the iPhone by lifting the left side of the assembly. Then they will use your plastic spudger to disconnect any FPC connectors. This removes all power from the phone. Be gentle, you can remove the socket from the motherboard, breaking your battery connector.
Then they will disconnect the front panel sensor assembly from the logic board with a plastic spudger to remove the display assembly.
Then the professional will disconnect the sensor assembly as with too much force you could remove the socket to the logic board. To prevent damage apply heat allowing the component to become supple, once again they will use your spudger but this time move the underlying connector away from the home/touch ID button. Once the device is cleaned, the professional reattaches everything with the same six screws previously used.
After that the professional will test your phone to see if the screen is fully functioning.
Finally, the iPhone 7 screen repair in Sydney will take place. Once this is completed, insert the two screws into the holes either side of the charging port.
Bottom Line
That's a huge display on your 7 Plus. As you can see, an iPhone 7 screen replacement in Sydney is extremely difficult and should only be attempted by a professional. One mistake could cost you extra cash or possibly destroy your mobile. So, if your IPhone falls down and look like spiderweb, contact your technician as soon as possible.
|
|
Article Source :
http://www.articleseen.com/Article_Broke your iPhone 7? Visit the Technician Shop!_322798.aspx
|
Author Resource :
The author of this article is the leading provider of iPhone 7 screen repair in Sydney. In this article, he discusses why to visit technician shop to repair your broken iPhone 7. To learn more, visit https://www.cheapmobilerepair.com.au/
|
Keywords :
iPhone repairs in Sydney, iPhone 7 screen repair in Sydney, iPhone 7 screen replacement in Sydney,
Category :
Communications
:
Mobile Phones
|
|
|
|