Basic Strategies for Car Maintenance
|
|
Posted On :
Oct-17-2011
| seen (381) times |
Article Word Count :
513
|
|
When it comes to how to do a full range of car maintenance and what can be true car maintenance, many of these owners will be puzzled, in the following are some useful tips to get rid of the dilemma.
|
|
Car maintenance has always been one of the commonplace topics for car owners. When it comes to how to do a full range of car maintenance and what can be true car maintenance, many of these owners will be puzzled, in the following are some useful tips to get rid of the dilemma.
1. Conventional oil replacement
The lubricating oil will be oxidized, aging in the use process, therefore it needs to be replaced timely or it will be mixed with sludge, coke, water, acids, PTFE rod and other products of incomplete combustion, which may significantly lower the oil anti-wear performance on the engine. Most of the cars for oil mileage is between 5000 to 10000 kilometers.
2. Replacement of the three filters
The purpose to replace the filter is to expel various impurities in the oil, prevent the engine from wear and tear, if not replacing for a long time, there will be partial block in the filter which may cause pollutants flowing directly into the engine and increase engine wear. It is also necessary to replace the fuel filter and air filter regularly. The general replacement standard is every 20000 km/on every two times replacing the filter when changing oil; every 10000 km/on every two times replace the filter when changing oil.
3. Addition
The best way to avoid dry friction effectively and protect car engine is to add anti-wear agent or wear-resisting agent when replacing the oil and filter. The anti-wear agent is made by the most slippery material that people has known at present, the Ptfe film,or we called teflon film. It can produce an ultrathin anti-wear oil film on the inner metal side of the engine, which can fill up the tiny sunken hole produced by engine wear and tear, thus the friction resistance can be reduced and save 55 to 12% of the fuel, and repair worn surface, extend engine life 2 to 3 times, lower noise, improve emissions.
4. Cooling system
Cooling system failure is the leading killer of the engine failure, accounting for 60%. Using tap water as cooling medium, the billed water may produce scale and gathered in the radiator, which may influence the normal heat dissipation. In cold season, once the temperature dropped to below 0℃, the water will freeze and expand, even crack the water tank and the cooling system pipe. While, the no water cooling liquid has overcome all the shortcomings of the media with water or water.
5. Deep maintenance
The most important thing of car maintenance is the cleaning and maintenance of all the engine circulation system. Such as the cleaning and maintenance of engine fuel system can effectively decompose the engine coke and improve the working efficiency. The cleaning and maintenance of engine lubrication system can fully enhance the service life of the engine power. And the cleaning and maintenance of the engine cooling system can increase engine power, reduce oil consumption and extend engine life.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_Basic Strategies for Car Maintenance_92883.aspx
|
|
Author Resource :
I have written teflon film and PTFE rod many years, I know many thing of these marketing. And this is my web site about PTFE rod and teflon film, you can find the other products about them.
|
|
Keywords :
ptfe rod, ptfe film, teflon Film,
Category :
Arts and Entertainment
:
Arts and Entertainment
|
|
|
|
