|
|
An Introduction to Automatic Sliding and Swing Gates in Perth
|
|
Posted On :
Jan-12-2017
| seen (755) times |
Article Word Count :
508
|
|
In common, automatic gates are used to control access to a secured area and used at the entrance of a facility. These gates are also used to control the vehicular access on and off the site.
|
|
In common, automatic gates are used to control access to a secured area and used at the entrance of a facility. These gates are also used to control the vehicular access on and off the site. Automatic gates are more commonly used in parking garages to separate employee parking areas from public areas of the garage.
Important Components of Automatic Gates
The two basic components of automatic gates are,
Gate: This physical object is used to block the gate opening and is usually designed to match the fencing adjacent to where the gate is installed.
Gate Opener: This machinery helps in moving the gate in and out, and is normally electrically-powered, chain-driven, gear-driven, or hydraulic depending on the type of operator.
Sliding Automatic Gates
This is the most commonly used type of automatic gates and are used in light-duty commercial applications. They are mounted parallel to the inside of the fence and slides horizontally back and forth across the gate opening. Rollers are installed at the bottom to enable the gate to move smoothly along a metal track that has been installed along the ground across the gate opening. Sliding gates in Perth are also called as rolling gates or V-track gates.
Swing Automatic Gates
Swing automatic gates are hinged on one side and operate like a common door. These gates are designed to travel a 90 degree arc between their open and closed positions. Because of their low cost and ease of operation and installation, these types of gates are used for residential purposes. There are two main considerations for installing a swing automatic door at your premises,
- Since the swing gates travel a large arc, there should be a considerable space for the vehicles approaching the gate to remain clear while the gate opens or closes.
- Additional safety features should be included o prevent people or vehicles from being hit by the moving gate.
Things to Consider While Choosing an Automatic Gate
The following basic considerations to be taken into account, if you are opting to buy an automatic gate for your commercial or residential premises.
Opening Size
This is the major determining factor in deciding on the type of automatic fate for your premises. The wider the gate opening, the installation cost of the particular type of gate would be high.
Availability of the Space
There should be enough space on all sides surrounding the gate to ensure that it opens or closes smoothly without hitting any objects or causing any minor or major threats.
The other factors to consider include,
- Weight of the gate
- Opening and Closing Speed
- Duty Cycle
- Grade
- Gate Construction
- Weather Conditions and more.
Choosing the right type of automatic gates in Perth for your residential or business premises can be a difficult task. But, following the above considerations, you can select the right product which doesn’t involve frequent down time and costly repairs.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_An Introduction to Automatic Sliding and Swing Gates in Perth_320404.aspx
|
|
Author Resource :
The author of this article is a leading seller of automatic gates in Perth with more than 15 years of experience in the field. He writes about the different types of gates and gives information and tips on choosing the right type of gates for your property. Visit http://ruralfencingsupplies.com.au for more.
|
|
Keywords :
Sliding gates in Perth, automatic gates in Perth,
Category :
Business
:
Business
|
|
|
|
|
|
