|
Interior exterior painting services – Your one stop solution
|
Posted On :
Jul-13-2011
| seen (323) times |
Article Word Count :
731
|
|
As preventive measures, check for any leakage from nearby plumbing pipes, and possible sweating caused by heat from a bathroom or kitchen. If you are able to locate the source, try to eradicate the issue by shutting off the condensation that causes the moisture.
|
Southern Perfection Painting Inc. is a renowned interior painting contractors in Atlanta region. From time to time we come up with the tips of how to take care of the painting problems that all of us face. We talked about common exterior paint problems like Peeling and Blistering.
The causes and solutions in the previous article; Let’s find out some more solutions to other serious problems associated.
Chalking: Most people overlook this problem which actually is the result of a chemical breakdown of the ingredients in paint called "chalking", remember the powdery substance we have all noticed at some point or another. Environmental elements break down the pigments, binders and solvent in the paint and chalking is mainly caused by poor priming and over thinned paint.
Chalking can be removed with ease by washing the affected surface with a solution of powdered laundry detergent and water. After preparing the solution, just apply it and then take a clean cloth or nylon brush to scrub the surface with force. If this doesn’t clear away the chalking then the surface should be washed using trisodiumphosphate (TSP) which unfortunately, may dull the finish and you will have to apply a fresh coat of paint once the chalking is removed. If the chalking is too much, you may want to use a "surface bonder" with a primer to improve last coat adhesion. Proper priming and painting your siding can be very helpful in preventing chalking in future.
Rust: Rust stains are majorly caused by the spoiled nail heads because when nails & moisture mix, nail heads tend to rust and create spots on painted surfaces on your home. This is mainly caused if you use uncoated steel nails where excessive moisture exists under the paint. Recommended is that you should remove the rusting nails and replace them with new galvanized nails or ceramic-coated construction screws as they are rust-resistant.
You might say that it is not possible to remove rusty nails because of the condition they are fit in, or any xyz reason. A workaround to removal of nails is to slightly sand them with sandpaper and then dab with a rust converter. Also, all the surrounding area that has rust stains must be treated with a shellac-based primer-sealer followed by a final coat of paint. As preventive measures, check for any leakage from nearby plumbing pipes, and possible sweating caused by heat from a bathroom or kitchen. If you are able to locate the source, try to eradicate the issue by shutting off the condensation that causes the moisture.
Cracks and Chips: Painted finishes often come down with time with the cracks and chips illness. In painting terms it is called "alligatoring" because the cracking on the paint surface looks like the regular scales of an alligator. This condition arises if hard-finish paint is applied over soft paint or flat paint is over high-sheen paint. Usually scraping, sanding, filling and priming as the precautionary work will help to not let this problem happen.
Mildew: Mildew causes the formation of brown, black or gray spots or blotches on the surface of paint or caulk because of fungi on the surface of the paint. The areas like underside of eaves which have northern exposure and receive no direct sunlight are where the problem actually starts from. Most common reasons for mildew growth are if you use low quality & insufficient amount of paint over a substrate or coating on which mildew is present, or fail to prime bare wood before painting.
To remove mildew you should first make sure that the discoloration really is mildew and not just dirt by applying a few drops of household bleach to it. Rinse the area after five minutes. If the dark color disappears then the problem is probably mildew. You can remove all mildew by scrubbing with a diluted household bleach solution made of one part bleach and three parts water. Make sure to take the proper safety precautions by wearing rubber gloves and eye protection. Also, make sure to leave the bleach on the surface for several minutes before rinsing. All of this will definitely help you, but highly affordable expert assistance is always just a phone call away at SPPI.
Whether you are looking for Atlanta interior designers or exterior designers, our experts can efficiently manage and cater to any of your painting and maintenance requirements.
|
|
Article Source :
http://www.articleseen.com/Article_Interior exterior painting services – Your one stop solution _66257.aspx
|
Author Resource :
Southern Perfection Painting Inc. is a renowned interior painting contractors in Atlanta region. For More info. see here…Atlanta interior designers
|
Keywords :
Atlanta interior designers, home improvements, hose exterior designer,
Category :
Home and Family
:
Home Improvement
|
|
|
|