Gas Detectors – Tips for Maintaining Your Equipment

Author Information

BELINDA RAHME BARAKAT has 128 Published Articles

Australia,
SYDNEY,
SYDNEY,
17/38 POWERS RD,
SEVEN HILLS

Gas Detectors – Tips for Maintaining Your Equipment

Posted On : Dec-05-2022 | seen (334) times | Article Word Count : 598 |

When was the last time you calibrated the gas detectors in your facility? Probably you don't remember or haven't thought much about it.

When was the last time you calibrated the gas detectors in your facility? Probably you don't remember or haven't thought much about it. Suppose your crew's working condition is exposed to potentially hazardous gases or explosives atmospheres. In that case, it's important to have well-maintained gas detectors on board to prevent fatal fire accidents in the workplace.

But, most facility owners often overlook the regular maintenance of life-saving equipment. You might think you had just replaced the gas detectors last year, and there's nothing wrong with them. But you might be wrong. Periodical maintenance of the gas detectors is the only reliable and safest method to detect the presence of hazardous gases in the atmosphere. Since gas detectors are used daily in dusty and harsh environments, they can be subjected to a build-up of grime, compromising the ability to identify hazardous levels of gases in the air.

In this article, we've shared some tips and advice on maintaining your gas detectors.

Bump Tests and Calibration

Regular maintenance, like bump tests and calibration, plays a crucial role in keeping the gas monitors healthy. While these tests are relatively easy and inexpensive, they are overlooked as most workers focus on getting their day started.

So, what is bump testing? Bump testing exposes the sensors of gas detectors to a high concentration of gas higher than the alarm set levels. Bump testing through calibration gas is crucial, and it's the only way to ensure that a methane gas detector and other gas monitors respond to alarms as they should. While bump testing proves that the sensors are picking up gas concentration and the alarms are working, it doesn't guarantee accuracy.

So to verify the accuracy and efficiency of the gas monitors, it's important to perform calibration once a month or according to the manufacturer's safety standards by exposing the monitors to the known concentration of calibration gas for a certain period. This helps to combat the gas readings impacted by gases or sensor drift and ensures the safety of the working personnel and the facility.

Do’s and Don’ts of Gas Monitor Maintenance

• Keep the monitor clean and free of obstruction to the sensors inside.

• Never use harsh chemicals or abrasive cleaners on the gas detectors. Wipe the monitor with a wipe cloth to remove the dust and dirt.

• Filters should be replaced regularly.

• Inspect the monitor regularly, check for cracks, faults, or broken pieces and fix them immediately.

• If anything looks abnormal, ask for a replacement or repair before using the gas detector.

• Batteries should have a fresh charge to ensure it doesn’t give up in the middle of the job, leaving you susceptible to dangerous gases.

• Perform bump tests daily before starting the work.

• Never use expired gases for performing a bump test.

• Ensure the gas detectors are calibrated using the same calibration gas every three months or so and adjust it based on the workload.

• Replace the sensors regularly as they analyse the presence of gas in the environment and trigger the meter to signal an alarm.

Only some facilities have the expertise and employees to perform bump tests, calibrations, and repairs. Let the experts handle it so you can depend on the gas monitors to work in crucial moments. Preventive maintenance can help ensure the efficiency of the gas monitors.

Re-Publish this Article

<h1>Gas Detectors – Tips for Maintaining Your Equipment </h1> Author: <a href='http://www.articleseen.com/profile_BELINDA RAHME BARAKAT.aspx'>BELINDA RAHME BARAKAT</a> When was the last time you calibrated the gas detectors in your facility? Probably you don't remember or haven't thought much about it. Suppose your crew's working condition is exposed to potentially hazardous gases or explosives atmospheres. In that case, it's important to have well-maintained gas detectors on board to prevent fatal fire accidents in the workplace.

But, most facility owners often overlook the regular maintenance of life-saving equipment. You might think you had just replaced the gas detectors last year, and there's nothing wrong with them. But you might be wrong. Periodical maintenance of the gas detectors is the only reliable and safest method to detect the presence of hazardous gases in the atmosphere. Since gas detectors are used daily in dusty and harsh environments, they can be subjected to a build-up of grime, compromising the ability to identify hazardous levels of gases in the air.

In this article, we've shared some tips and advice on maintaining your gas detectors.

Bump Tests and Calibration

Regular maintenance, like bump tests and calibration, plays a crucial role in keeping the gas monitors healthy. While these tests are relatively easy and inexpensive, they are overlooked as most workers focus on getting their day started.

So, what is bump testing? Bump testing exposes the sensors of gas detectors to a high concentration of gas higher than the alarm set levels. Bump testing through calibration gas is crucial, and it's the only way to ensure that a methane gas detector and other gas monitors respond to alarms as they should. While bump testing proves that the sensors are picking up gas concentration and the alarms are working, it doesn't guarantee accuracy.

So to verify the accuracy and efficiency of the gas monitors, it's important to perform calibration once a month or according to the manufacturer's safety standards by exposing the monitors to the known concentration of calibration gas for a certain period. This helps to combat the gas readings impacted by gases or sensor drift and ensures the safety of the working personnel and the facility.

Do’s and Don’ts of Gas Monitor Maintenance

• Keep the monitor clean and free of obstruction to the sensors inside.

• Never use harsh chemicals or abrasive cleaners on the gas detectors. Wipe the monitor with a wipe cloth to remove the dust and dirt.

• Filters should be replaced regularly.

• Inspect the monitor regularly, check for cracks, faults, or broken pieces and fix them immediately.

• If anything looks abnormal, ask for a replacement or repair before using the gas detector.

• Batteries should have a fresh charge to ensure it doesn’t give up in the middle of the job, leaving you susceptible to dangerous gases.

• Perform bump tests daily before starting the work.

• Never use expired gases for performing a bump test.

• Ensure the gas detectors are calibrated using the same calibration gas every three months or so and adjust it based on the workload.

• Replace the sensors regularly as they analyse the presence of gas in the environment and trigger the meter to signal an alarm.

Only some facilities have the expertise and employees to perform bump tests, calibrations, and repairs. Let the experts handle it so you can depend on the gas monitors to work in crucial moments. Preventive maintenance can help ensure the efficiency of the gas monitors.

About the Author: The author is an active blogger and renowned for providing innovative solutions such as broken bag detectors, infrared gas detectors, personal gas monitors, industrial sirens and beacons, broken bag detectors and turbidity analysers to the Oil & Gas, Chemical, Petrochemical, Manufacturing, Food, Pharmaceutical, Water Treatment, and many other industries across Australia and New Zealand. Visit https://prodetec.com.au/ for more details on calibration gas in Australia. Article Source: <a href='http://www.articleseen.com/Article_Gas-Detectors-–-Tips-for-Maintaining-Your-Equipment_330442.aspx'> http://www.articleseen.com/Article_Gas Detectors – Tips for Maintaining Your Equipment _330442.aspx</a>

Article Source : http://www.articleseen.com/Article_Gas Detectors – Tips for Maintaining Your Equipment _330442.aspx

Author Resource :
The author is an active blogger and renowned for providing innovative solutions such as broken bag detectors, infrared gas detectors, personal gas monitors, industrial sirens and beacons, broken bag detectors and turbidity analysers to the Oil & Gas, Chemical, Petrochemical, Manufacturing, Food, Pharmaceutical, Water Treatment, and many other industries across Australia and New Zealand. Visit https://prodetec.com.au/ for more details on calibration gas in Australia.

Keywords : methane gas detector, calibration gas, calibration gas in Australia,

Category : Business : Business

Print this Article Send to Friend