|
|
Engineering Pneumatic Systems – Pneumatic Technology and Parts
|
|
Posted On :
Sep-30-2011
| seen (467) times |
Article Word Count :
416
|
|
Pneumatic technology has come a long way since itsinceptionin the 17thcentury bya German physicist. It wasn’t until 1829 however; a successful air compressor was patented using cylinders. The use of pneumatics has shaped history through its countless applications through inventions.
|
|
Pneumatic technology has come a long way since itsinceptionin the 17thcentury bya German physicist. It wasn’t until 1829 however; a successful air compressor was patented using cylinders. The use of pneumatics has shaped history through its countless applications through inventions. Pneumatic technology was and is used in motors and tools in all type of industries. Pneumatic devices rely on compressed air or inert gases to generate it power. Combined with cylinders and valves, the equipment is often able to product large amount kinetic power.Valves located in the cylinder regulate the flow of compressed air or fluids as well as maintain the pressure inside the cylinder. There are hundreds of pneumatic tools for different occasions; Included in this list is nail guns, drills, air sanders, air staplers, all of which are powered air compressors. It’s important to the buy the proper air compressor for the equipment. Pneumatic suppliers are familiar with the equipment andcanhelp you choose the correct compressor in regards to size, air pressure and air flow capacities. The improper combination of parts could damage the tools or cause serious personal injury. Always wear proper safety while operating.
Some of the advantages of using pneumatic tools, over their electric and gas powered counterparts include: Pneumatic tools generally cost less to purchase due to the fact that they have fewer movingparts in the constructive design. Most products with few functioning parts are less susceptible to malfunctioning and breaking. Pneumatic tools are usually coveredin a strong light alloy metal instead of plastic which eventually cracks. Even though electric counter parts are made of plastic they are usually heavier than the pneumatic products due to the steel shaft and copper winding found inside the shell. Another feature of pneumatic tools is variance ability of power. By simply adjusting the air valve you can control the equipment’s power.A pneumatic compressor also uses less energy than electric tools. A pneumatic compressor can easily run a 3 to 5 horse power tool using 120 volts, electric where as a tool would require 240 volts. With that said, pneumatic equipment is most commonly used in industrial manufacturing environment for provide raw energy savings. Pneumatic tools have yet another advantage because they can be used in area with moisture and water. In places where electric cords are unable to be run, pneumatic tubing can take its place. With a portable air compressor one would be able to use the equipment anywhere cheaper than it would be to buy a gas powered generator.
|
|
|
|
Article Source :
http://www.articleseen.com/Article_Engineering Pneumatic Systems – Pneumatic Technology and Parts_87354.aspx
|
|
Author Resource :
This article is provided by Ritter Technology – A industrial power fluid company that specializes in Pneumatic System Design and Pneumatic Valves.
|
|
Keywords :
Ritter Technology, Pneumatic Parts Supplier, Pneumatic Repair Services, Pneumatic System Design, Pneumatic Valves, Pneumatic ,
Category :
Business
:
Business
|
|
|
|
|
|
